316112005 Frigidaire Oven Range Anti Tip Bracket kit is a safety-mounting assembly designed to secure a freestanding or slide-in oven/range to the adjacent floor or cabinet structure. The kit typically consists of a formed steel bracket, mounting hardware, and fasteners sized to interface with the range’s rear chassis or leveling leg assembly; it is indeed a mechanical restraint rather than an electrical or electronic component, and is intended to prevent the appliance from tipping forward under load.
Within the appliance system the anti-tip bracket functions as a structural interface between the range and the building structure. It interacts directly with the range’s frame or leveling legs and with the substrate (floor, cabinet, or wall) to transfer overturning moments produced when the oven door is opened or when weight is placed on an open door. Proper engagement of the bracket affects installation alignment, working clearances, and overall stability, and it must be installed with appropriate fasteners and clearances to perform as intended under static and dynamic loads.
In the article readers will find a technical overview of how the 316112005 anti-tip bracket operates, guidance on model compatibility and typical mounting locations, common failure symptoms (such as range rocking, forward movement when the door is opened, or loose/missing fasteners), step-by-step troubleshooting checks, and practical replacement considerations including fastener selection, corrosion resistance, torque and alignment requirements, and verification tests after installation. The content is aimed at technicians, engineers, and appliance owners who need clear, safety-focused procedures and diagnostic criteria for assessing and restoring proper anti-tip protection.
Table of Contents
- Function and Role of the Anti‑Tip Bracket in Oven Safety and Load Transfer
- How the 316112005 Frigidaire Oven Range Anti Tip Bracket Kit Works Inside the Appliance
- Common Failure Symptoms, Wear Modes, and Safety Indicators for Anti‑Tip Brackets
- Replacement Considerations and Step‑by‑Step Installation Procedures for the 316112005 Kit
- Q&A
- Future Outlook
Function and Role of the Anti‑Tip Bracket in Oven Safety and Load Transfer
The primary function of the 316112005 Frigidaire Oven Range Anti Tip Bracket Kit is to prevent forward tipping by creating a rigid load path from the front edge of the range to the building structure. Mechanically, the bracket provides a reaction point that converts the overturning moment produced when the oven door is opened or a load is placed on the open door into shear and bearing forces at the anchor location. Properly installed, the bracket is fixed to the range chassis and to a structural element (typically a wall stud or suitable floor anchor), so the majority of the overturning moment is carried through the bracket and fasteners rather than through the appliance cabinet or leveling legs. The part is typically stamped steel with a corrosion-resistant coating and sized to interface with the manufacturer’s rear mounting bosses; bending of the bracket or fastener pull-out are the usual failure modes when installation or substrate selection is inadequate.
Compatibility and installation details determine whether the kit will perform as intended.The 316112005 kit fits specific Frigidaire range mounting patterns and must be mated with anchors appropriate to the wall or floor construction; for example, lag screws into solid wood studs provide a very different capacity than masonry anchors in block or brick. Inspect for correct alignment (bracket engages the chassis slot without preload), secure fastener engagement (no stripped threads or loose fit), and appropriate clearances so range leveling does not induce unwanted load on the bracket. Common inspection points and practical checks include:
- Confirm bracket engages the range chassis slot and is flush against the wall or floor mounting surface.
- Verify fastener type and embedment depth are matched to the wall substrate (wood stud, metal stud with toggle, or masonry anchor).
- Check for visible deformation, corrosion, or loose hardware that would reduce resistance to overturning moment.
- ensure the range is level and the anti‑tip bracket does not carry static preload that could mask improper anchoring.
| Item | Description |
|---|---|
| Material | Stamped steel with protective finish; resists bending within rated limits |
| Mounting interface | Range chassis engagement point to wall stud or floor anchor; must align with manufacturer pattern |
| Fastener types | Typical options: lag screw for wood stud, masonry anchor for block/brick, or toggle/anchor for metal stud per installer assessment |
How the 316112005 Frigidaire oven Range Anti Tip Bracket Kit Works Inside the Appliance
The 316112005 Frigidaire Oven Range Anti Tip Bracket Kit is a passive mechanical restraint that prevents a range from pivoting forward by creating a reinforced anchor point between the appliance chassis and a fixed building structure (wall stud or floor). The kit typically consists of a stamped steel bracket and fasteners that engage the appliance leg or rear frame; under load the bracket transfers tipping moment into shear and bearing forces on the anchor fastener rather than into the oven cabinet. as the device is purely mechanical, its effectiveness depends on correct placement, fastener type and substrate strength rather than on any electronic or dynamic components.
In practise the bracket interfaces with the range by capturing the rear leveling leg or mating to a rear chassis tab, limiting forward rotation to a small angle and preventing the center of gravity from moving past the front feet. Technicians verify correct installation by confirming the bracket is tight to a structural member, that specified fastener torque is met, and that the bracket engages before the range reaches a hazardous tilt; loose or corroded fasteners and mounts reduce capacity and require replacement. The kit is compatible with most Frigidaire free-standing ranges that use a rear leg or chassis tab anchor, but model-specific clearance and leg geometry should be checked before retrofit or replacement.
- Primary function: arrest forward rotation by transferring moment to anchor fastener
- Common materials: stamped steel bracket with corrosion-resistant finish
- Installation checks: proper fastener type, stud/floor engagement, and torque verification
- Replacement triggers: missing bracket, visible deformation, or failed fastener engagement
| Item | Description |
|---|---|
| Mounting interface | Captures rear leveling leg or mates to chassis tab; requires structural backing (stud or concrete) |
| Load behavior | Converts tipping moment to shear and bearing on fastener; capacity limited by anchor substrate |
Common Failure symptoms, Wear Modes, and safety Indicators for Anti‑Tip Brackets
The 316112005 Frigidaire Oven Range Anti Tip Bracket Kit is a mechanical restraint that prevents forward rotation of the range by anchoring the rear foot or chassis to the floor or wall structure. In service, the bracket and its fasteners operate under repeated shear and bending loads as the oven door is opened, cookware is placed on the open door, or the range is bumped during use. Typical materials are stamped or bent steel for the bracket, carbon-steel screws or lag bolts, and sometimes plastic or metal anchors for attachment into subfloors; compatibility depends on the range chassis configuration and the substrate type (wood floor, concrete slab, or tile). Failure reduces the bracket’s engagement or clamping force and usually presents as progressive loosening,elongation of fastener holes,corrosion of plated parts,shear failure of screws,or permanent deformation of the bracket lip that engages the range frame.
- Noticeable rocking or forward rotation of the appliance when the door is opened or when weight is applied to the open door.
- Visible gap between the bracket and the mounting surface, bent or flattened bracket geometry, or pulled-out anchors and elongated mounting holes.
- Corroded, sheared, or stripped fasteners and audible creaks under load indicating metal fatigue or loss of preload.
| Item | Description |
|---|---|
| Bent or deformed bracket | Indicates overload or impact damage; reduced engagement with the range chassis and increased tip risk. |
| corroded or pulled anchors | Loss of retention in the substrate; common on concrete with inadequate anchors or in wet environments. |
| sheared/stripped fasteners | Mechanical failure of the load path; bracket may appear present but provides no restraint. |
Technicians should interpret these indicators together: a single rust spot is seldom critical,but deformation combined with movement under load signals end-of-life for the assembly. Practical checks include a visual inspection of bracket geometry and fastener condition, and a controlled load test (apply forward force at the oven door while observing bracket behavior) to confirm restraint. When replacing worn components, select the 316112005 kit or an OEM-equivalent that matches the range’s chassis interface and the floor/wall substrate; using incorrect anchors or shorter fasteners can reintroduce failure modes such as pullout or shear. In field examples, kitchens with heavy countertops, frequent use of the oven door as a temporary work surface, or installation on thin tile over plywood exhibit accelerated wear and should be inspected more frequently.
Replacement Considerations and Step‑by‑step Installation Procedures for the 316112005 Kit
the 316112005 Frigidaire Oven Range Anti Tip Bracket Kit secures the rear of a freestanding range to prevent forward tipping when a load is applied to the open oven door. Replacement considerations include verifying the bracket geometry, fastener types, and anchor compatibility with the installation substrate: the kit’s bracket must engage the range chassis at the designed mounting point and transfer load into a wall stud or rated masonry anchor.Check oven model fitment and the position of the rear leveling legs before swapping kits; on some Frigidaire models the anti‑tip interface is routed through the toe kick or rear chassis lip, which affects whether the supplied screws or larger lag anchors are appropriate. Also confirm clearance behind the oven (power cord, gas line, combustible materials) and the bracket’s orientation so that the installed bracket will engage the range when it is slid fully into its final position.
Follow a controlled, safety‑first procedure for installation: disconnect electrical power and gas supply, slide the range clear of the opening, and verify chassis condition at the attachment point. Use the manufacturer’s template or measure the vertical and horizontal location relative to the floor and adjacent studs, then fasten the bracket with the appropriate anchor type and torque; for wood studs use lag screws tightened to the value indicated by the screw manufacturer, for masonry use expansion anchors sized for the applied shear load. after fastening,reposition the range,engage the bracket,and perform a verification test by applying a forward load to the top front edge of the door-ther should be no excessive rotation or disengagement. For tiled floors, recessed toe kicks, or older ranges with corroded chassis, adapt fastener selection and drilling technique to avoid cracking finishes or compromising the structural anchorage.
- Remove range and disconnect utilities.
- Locate studs or suitable anchors; mark bracket position.
- Drill pilot hole(s) and install bracket with specified fasteners.
- slide range back, engage bracket, and level range.
- Perform a pull/tilt test to confirm engagement and stability.
| Item | Description |
|---|---|
| Bracket | Steel anti‑tip plate sized to engage range chassis at manufacturer mounting point |
| Fasteners | Assortment of screws/lag bolts; select anchor type for stud or masonry |
| Anchors/Hardware | Wall anchors or masonry plugs supplied or specified based on substrate |
| Template/Instructions | Mounting guideline indicating vertical height and lateral position from reference edges |
Q&A
What is the purpose of the 316112005 Frigidaire Oven Range Anti-Tip Bracket Kit?
The anti-tip bracket kit prevents a range from tipping forward if weight is placed on an open oven door (for example, someone standing or leaning on it). It secures the rear of the appliance to the floor or wall so the range remains stable and reduces the risk of burns, spills or the appliance falling.
Which ranges is part number 316112005 compatible with?
316112005 is a Frigidaire anti-tip bracket sold for many Frigidaire/Household/Gladiator ranges. Compatibility depends on the specific range model and installation type (freestanding vs slide-in). Always confirm fit by checking the range’s model number against the part listing or the Frigidaire parts lookup; if in doubt, contact Frigidaire or a qualified technician.
What comes in the anti-tip bracket kit?
Typical contents include the metal anti-tip bracket, one or more mounting fasteners (screws), and installation instructions. Some kits may include anchors for different floor types. Contents can vary, so inspect the package and the instructions before starting the installation.
Do I need any special tools to install this anti-tip bracket?
Common tools required are a drill and bits (masonry bit for concrete), screwdriver or nut driver, tape measure, pencil, and possibly a hammer for anchors.you may also need a stud finder if mounting to a wall stud instead of the floor. Personal protective equipment (gloves, eye protection) is recommended.
Can I install the bracket on tile, concrete, or a wooden floor?
Yes, but use the correct fasteners. For wood subfloors or floor joists, standard wood screws into the subfloor or a floor joist are appropriate. For concrete or tile, use masonry anchors or concrete screws. If mounting to a wall, secure into a wall stud. follow the kit instructions and use anchors rated for the substrate. If unsure, consult a qualified installer.
Is the anti-tip bracket required by code or manufacturer instructions?
Yes. frigidaire and most appliance safety codes require anti-tip devices be installed on ranges. Many jurisdictions and safety standards mandate their installation. Manufacturers often state that failure to install the anti-tip device can lead to injury and may void portions of the warranty related to tipping incidents.
How do I verify the bracket is installed correctly and the range is secured?
After installation, slide the range back into place and visually confirm the rear leveling leg or bracket tab engages the installed anti-tip bracket. The bracket should stop the range from moving rearward. For added confidence,gently try to tilt the top of the range forward (with no one leaning on it) or inspect under the rear lower panel to ensure the bracket and screw are seated as shown in the instructions. If you cannot verify engagement or the range moves freely, do not use the range until corrected.
My new frigidaire range didn’t come with a bracket - can I still use the range?
No - you should not leave the range unprotected. Many new ranges include the anti-tip device in the packaging; if it is missing, contact the dealer or Frigidaire for the correct kit (316112005 or the kit specified for your model).Install the appropriate anti-tip device before using the range to ensure safe operation and compliance with manufacturer instructions and local codes.
future Outlook
The 316112005 Frigidaire Oven Range Anti tip Bracket Kit serves a fundamental safety function by securing freestanding ranges against accidental tipping. Properly installed,the kit helps prevent the range from shifting or falling forward during normal use,reducing the risk of burns,scalding,and other household injuries.As a simple but critical component of kitchen safety, the anti-tip bracket is an essential part of meeting manufacturer recommendations and applicable safety standards for freestanding ovens.
Accurate diagnosis of a compromised or missing anti-tip bracket is important; signs of damage,loose fasteners,or an unsecured appliance should prompt inspection. When inspection reveals wear, deformation, or improper installation, timely replacement with the correct 316112005 kit restores the intended protection. Using the specified kit and following the manufacturer’s installation guidance or engaging a qualified technician ensures the bracket performs as designed.
In sum, the 316112005 frigidaire Oven Range Anti Tip Bracket Kit is a small but vital safety accessory. Regular checks, appropriate diagnosis, and prompt replacement when necessary help maintain a safe cooking environment and support compliance with manufacturer safety recommendations.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok