240495804 Frigidaire Refrigerator Door bin Replacement is the designated replacement part for a refrigerator door storage bin used on select Frigidaire appliance models. The component is a molded door-mounted shelf-typically formed from a rigid thermoplastic such as ABS or polypropylene-designed to accept household items (bottles, condiments, eggs) and to attach to the refrigerator door liner via integrated mounting tabs, snap-fit clips, or screw points.
Functionally, the door bin is a non-powered, load-bearing element that interfaces with the door liner, gasket sealing surface and the hinge/closing system. It contributes to internal storage organization while influencing the effective thermal envelope of the cabinet by determining how items are distributed on the door during opening and closing cycles. Mechanically, the bin transfers static and dynamic loads to the door liner through its mounting features; failures (cracked shelves or broken clips) can cause load redistribution that interferes with door alignment, gasket compression and seal integrity, which in turn can affect heat ingress and compressor duty cycle.
In this article readers will find detailed information on the 240495804 part including its nominal function and design features, model compatibility and dimensional mounting requirements, common failure symptoms (cracking, clip breakage, sagging, interference with door closure), diagnostic checks and basic troubleshooting steps, and practical replacement considerations such as verifying OEM versus aftermarket fit, torque and fastening methods, and safe disposal of failed components. The goal is to provide technicians, engineers and appliance owners with the technical context needed to assess, source and install the correct door bin for reliable door operation.
table of Contents
- Function and Role of the Refrigerator Door Bin in Frigidaire Storage and Thermal Management
- How the 240495804 Frigidaire Refrigerator Door Bin Replacement Integrates with Door Hardware and Operates Within the Appliance
- Common Failure Symptoms, Wear Patterns and Mechanical Stress Indicators of Door Bins
- Compatibility, Fitment, Installation Best Practices and Troubleshooting Procedures for 240495804 Frigidaire Refrigerator Door Bin Replacement
- Q&A
- To wrap It Up
function and Role of the Refrigerator Door Bin in Frigidaire Storage and Thermal Management
The refrigerator door bin serves as both a storage platform and a mechanical interface that affects door alignment, sealing, and load distribution.A 240495804 Frigidaire Refrigerator Door Bin Replacement is designed to match the original mounting peg geometry, clip retention profile, and panel clearance so that the bin restores the correct lever arm and torque on the door hinge when loaded. These bins are molded from rigid thermoplastics (commonly ABS or polycarbonate) with molded ribs to limit deflection; in consumer units typical safe loads are in the range of 2-4 kg (4-9 lb) per shelf, and exceeding that range will increase door sag, accelerate hinge wear, and can prevent full gasket compression. Compatibility depends on peg spacing, clip shape, and front lip geometry rather than color or cosmetic fit, so technicians should verify mounting dimensions before substituting non‑OEM pieces to avoid altered door dynamics and sealing issues that increase compressor run time and temperature drift.
Door bins also influence refrigerator thermal behavior by modifying internal airflow patterns and creating local thermal inertia for frequently accessed items. Bins mounted on the door act as barriers to convective circulation from the cabinet; tall containers or tightly packed bins can create dead zones where temperature rises slightly or condensation forms on adjacent surfaces. replacing a cracked or warped bin restores the designed clearances that allow the gasket to seat properly and helps maintain expected temperature stratification between door and cabinet compartments. Practical checks during installation include ensuring clips engage fully, confirming door swings freely without rubbing, and performing a short door‑closure temperature check to verify no measurable warm air ingress under normal load conditions.
- Verify peg spacing and clip profile against the old bin before installation.
- Inspect for cracks or rib damage that increase deflection under load.
- Load test with representative items to confirm no door sag or gasket leakage.
- Measure clearance to shelving to ensure airflow is not obstructed.
| Item | Description |
|---|---|
| Material | Impact‑resistant ABS/polycarbonate with molded reinforcement ribs |
| Mounting | Snap‑in peg and clip interface; must match door inner panel geometry |
| Typical load capacity | Approximately 2-4 kg (4-9 lb) per bin in normal use; excessive load increases hinge torque |
| Thermal effect | Alters convective flow and provides localized thermal buffering; improper fit can increase temperature variability |
How the 240495804 Frigidaire Refrigerator Door Bin Replacement Integrates with Door Hardware and operates Within the Appliance
The 240495804 Frigidaire Refrigerator Door Bin Replacement functions as a modular storage element that mechanically and spatially integrates with the refrigerator door’s inner liner and hardware. It installs on the molded door rails using stepped, snap-fit tabs and occasionally additional screw bosses; these interface points transfer static and dynamic loads from stored items into the door structure. The replacement bin’s injection-molded thermoplastic construction is chosen for dimensional stability and low creep so that the bin maintains clearance with the door gasket and does not deform under normal loads.Proper seating of the bin into its rail pockets maintains the intended cabinet airflow pathways and prevents interference with the door seal, while misalignment or fractured tabs commonly causes rattling, impaired door closure, or local stress concentrations on the door liner.
Service and compatibility considerations focus on matching the bin’s mounting geometry and verifying functional behavior after installation. Technicians should verify that the snap-fit tabs fully engage the door rail and that the bin lip clears the gasket by a few millimeters during a full close; if the bin includes retention clips, confirm those clips are not brittle. Practical checks and procedures include:
- Inspect mounting tabs and rail pockets for cracks, wear, or deformation before installing the replacement.
- Seat the bin until an audible click or tactile stop is felt, than test door closing with a typical load distribution.
- Avoid concentrated heavy loads on a single bin; redistribute weight to reduce stress on tabs and rails.
| Item | Description |
|---|---|
| Material | injection-molded thermoplastic designed for dimensional stability and impact resistance |
| Mount interface | Snap-fit tabs into molded door rails; optional screw bosses on some door designs |
| Common failure modes | Fractured tabs, worn rail pockets, interference with gasket due to deformation or misalignment |
Common Failure Symptoms, Wear Patterns and Mechanical Stress Indicators of Door Bins
The refrigerator door bin functions as a cantilevered storage shelf that relies on molded mounting bosses and snap-fit clips to transfer loads into the door inner liner; replacement with the correct part restores the designed load path. For models that use the 240495804 Frigidaire Refrigerator Door Bin Replacement, matching the clip geometry, wall thickness and mounting boss spacing is essential because small dimensional differences change stress distribution at the engagement points. Common mechanical behavior observed before failure includes progressive flexing at the bin lip under repeated loads, localized creep where heavy jars concentrate stresses near the ends, and chemical embrittlement or crazing from contact with cleaning solvents or high-fat foodstuffs that accelerate crack initiation at the mount bosses.
- Cracking at the mounting tabs or along the inner corner radii (typically starts as a hairline fissure).
- Excessive lateral play or detachment when the bin is loaded, indicating worn clips or deformed bosses.
- Warping or permanent set in the bin body, reducing sealing against the door and causing interference.
- Surface abrasion or scored faces from repeated insertion/removal, weakening local cross-section.
| Item | Description |
|---|---|
| Crack at snap-in tab | High cyclic bending stress at the tab root due to off-center loading or thin wall section. |
| Loose fit | Deformed boss or worn clip geometry causing increased tolerance and reduced engagement force. |
| Warped bin | Thermal cycling or plastic creep from sustained loads leading to dimensional change and sealing loss. |
Mechanical inspection should include a visual scan for stress whitening, flex testing the bin under representative load to observe any excessive deflection, and measuring boss spacing against the door liner. If stress whitening, hairline fractures at the tab roots, or permanent set are present, replacement is the pragmatic option since these indicate material fatigue or loss of section modulus; selecting a replacement that reproduces the original clip geometry and wall thickness minimizes reoccurrence. In practice, redistribute heavy items, avoid point-loading at bin ends, and verify that any replacement part aligns with the door’s mounting bosses before reusing the original clips or fasteners.
Compatibility, Fitment, Installation Best Practices and Troubleshooting Procedures for 240495804 Frigidaire Refrigerator Door Bin Replacement
The 240495804 Frigidaire Refrigerator Door Bin Replacement is an injection-molded door shelf designed to restore storage capacity and containment on door liners that use removable shelf bins. Fitment depends on the door liner geometry rather than the refrigerator model name alone; confirm compatibility by matching the bin’s peg pattern and lip profile to the refrigerator door – measure the center-to-center spacing of the mounting pegs and verify whether the liner accepts a single-peg,dual-peg,or full-length rail-style bin. The replacement part functions as a passive shelf: its load path transfers weight to the molded pegs and the door liner, so correct seating of the pegs and undamaged receiving sockets are required for predictable behavior under normal load (bottles, jars, cartons).Avoid assuming interchangeability across different liner designs even within the same brand; check the OEM parts list or the service manual when in doubt.
| Item | Description |
|---|---|
| Material | Injection-molded plastic designed for thermal stability and impact resistance in refrigerated environments |
| Mounting | Dual peg or rail-style engagement – verify peg center spacing and peg diameter |
| Common failure modes | Cracked tabs, worn receiver sockets, stress fractures from point loads or door slamming |
Installation best practices focus on alignment and avoiding point stress on the mounting features: clean the receiving sockets of debris, align the bin so the pegs enter squarely, then apply even pressure until the bin fully engages; if resistance is felt, stop and re-check alignment rather than forcing the part, which risks fracturing the pegs. Troubleshooting steps include inspecting the door liner receivers for plastic deformation or cracks, confirming the door closes without the bin contacting the gasket, and testing the bin under typical load to verify ther is no excessive sag. If the bin clicks into place but rattles, check for wear in the receiver; small movement can sometimes be remedied with a thin pad or adhesive shim, but failing receivers generally require liner repair or replacement for a durable fix.
- Symptom: Bin will not engage – Action: verify peg spacing, clear obstructions, inspect for broken peg tips.
- Symptom: Bin sags under load – action: inspect receiver sockets for cracks or elongation; consider replacing liner if damaged.
- symptom: Bin interferes with door closure – Action: check vertical placement and gasket clearance; reposition or use alternate bin height if available.
Q&A
What is Frigidaire part 240495804 and what does it replace on my refrigerator?
Part 240495804 is a replacement door bin (also called a door shelf or dairy shelf) designed for use on certain Frigidaire refrigerators. It replaces a cracked, chipped, or missing clear plastic storage bin that mounts on the inside of the refrigerator door and holds items like condiments, butter, or small containers.
How do I know if this part is compatible with my Frigidaire refrigerator?
Check your refrigerator model and serial number (usually on a sticker inside the fresh-food compartment or on the door gasket). Cross-reference that model with the part listing from Frigidaire or an authorized parts dealer. If the online listing shows your model or a compatibility table, it’s compatible. If unsure, provide the model number to the parts supplier or Frigidaire customer service before ordering.
What tools do I need and how long does installation take?
Most door bins install without tools: lift the old bin up and out of its mounting slots and push the new one into place. If the bin is held with screws or retaining clips, you may need a Phillips screwdriver and a flat tool for clips.Typical replacement time is 5-15 minutes per bin for a homeowner; a technician may be faster.
Why won’t the new bin snap into place or it feels loose after installation?
First confirm the part is the correct model-specific bin. Inspect the door’s mounting tabs or clip bosses for damage-broken or worn tabs will prevent a secure fit and may require separate clip or door repair. Ensure you’re aligning the bin’s mounting slots with the door studs and inserting fully until it clicks or seats. If the bin itself is slightly different (shape or depth), it may be the wrong part.
Can I use a 240495804 bin on either side of the door or is it side-specific?
Some door bins are universal and reversible,but many are shaped for a specific position (upper/lower or left/right) due to contours and mounting locations. Don’t assume interchangeability-verify the intended position in the parts diagram or the part description. If shape or mounting clips differ, it’s side-specific.
How can I remove a stuck or broken bin without damaging the door?
If the bin is stuck, lift it firmly upward (most bins are hooked on bottom rails and tilt out at the top). For broken bins with jagged edges, wear gloves and gently pry the remaining pieces out, using a flat plastic tool to avoid scratching. If mounting studs are damaged, support the door and carefully remove remaining plastic to assess whether clips or the entire door trim need replacement.
How should I clean and care for the replacement door bin?
Wash the bin with warm water and mild dish soap; rinse and dry thoroughly. Avoid abrasive cleaners, scouring pads, or strong solvents (acetone, bleach) that can cloud or weaken the plastic.Do not put large rigid bins in a dishwasher unless the manufacturer explicitly states it’s dishwasher-safe-high heat can warp some plastics.
What warranty or guarantee comes with part 240495804 and where should I buy it?
Warranty terms vary by seller and whether you buy directly from Frigidaire, an authorized dealer, or a third-party supplier. OEM Frigidaire parts often carry a limited parts warranty-check the specific listing or contact Frigidaire support. To ensure fit and quality, buy from Frigidaire or an authorized parts distributor and keep receipts and your refrigerator model/serial number in case you need a warranty claim or return.
To Wrap It Up
The 240495804 Frigidaire refrigerator door bin plays a practical role in everyday appliance use by providing organized storage, protecting items from shifting during door movement, and helping to prevent spills that can lead to interior damage or odors.As a small but integral component of the door assembly,a sound door bin contributes to overall convenience,safe storage of food and containers,and the effective use of refrigerator space.
Proper diagnosis is important before replacement: inspect for cracks, compromised mounting tabs, excessive wear, or a loose fit that can allow items to fall or stress adjoining components. When inspection indicates damage or diminished function, replacing the bin with the correct 240495804 part ensures compatibility, restores secure attachment, and helps avoid repeat failures. Whether the replacement is performed by a qualified technician or a careful DIYer, using the correct part and ensuring proper installation minimizes risk of further damage and preserves appliance performance.
timely recognition and appropriate replacement of a faulty door bin help maintain the refrigerator’s usability and safety. Attending to this component as part of routine care supports long-term serviceability and convenience without requiring extensive intervention when issues are addressed promptly and correctly.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok