316272000 Frigidaire igniter and Orifice Holder is a combined ignition and gas metering component used on certain Frigidaire gas ranges and ovens; it incorporates a mounting bracket that positions the igniter relative to the burner orifice and secures the orifice in the appliance’s burner assembly.As a physical and electrical assembly, the part both locates the gas jet that meters fuel flow and provides the structural interface for the igniter (either a hot surface or spark type), ensuring consistent spacing and alignment required for reliable ignition.
inside the appliance the igniter and orifice holder sits between the gas manifold/valve and the burner head and directly interfaces with the fuel delivery, ignition, and flame-sensing systems. Proper placement and sealing of the orifice affect gas flow rate and combustion characteristics, while the igniter element provides the energy or heat necessary to ignite the fuel. The assembly therefore interacts with the gas valve,control electronics (timing and safety interlocks),burner tube,and any flame-detection device; misalignment,blockage,or electrical fault in the assembly can produce ignition delays,incomplete combustion,or safety cut-outs.
In this article readers will find a technical overview of the component’s function and construction, guidance on model compatibility and identifying the correct orifice size and mounting orientation, common failure symptoms and diagnostic checks (visual inspection, continuity and voltage checks, and flow/combustion indicators), and practical replacement considerations such as required seals, torque points, and safety precautions to observe when working on gas appliances. The focus is on providing technicians, engineers, and appliance owners with the data needed to assess whether the assembly is performing correctly and to make informed decisions about troubleshooting or replacement.
Table of Contents
- Function and Role of the igniter and Orifice Holder in Frigidaire Gas Appliances
- How the 316272000 frigidaire Igniter and Orifice Holder Operates Within the Burner Assembly
- Common Failure Symptoms and Measurable Indicators of Igniter and Orifice Holder Faults
- Compatibility, Replacement Criteria, and Installation Requirements for the 316272000 Frigidaire Igniter and Orifice Holder
- Q&A
- The Conclusion
Function and Role of the Igniter and Orifice Holder in Frigidaire Gas Appliances
The 316272000 Frigidaire Igniter and Orifice Holder combines the high-voltage ignition electrode with the gas-orifice mounting bracket into a single serviceable assembly used on many Frigidaire gas ranges and cooktops. The electrode is ceramic-insulated to provide a concentrated spark at the burner port while the orifice holder secures the metering orifice and positions it precisely relative to the electrode and burner ports; precise alignment and insulation prevent flashback and ensure consistent ignition timing. The assembly’s metal bracket provides mechanical retention and grounding, and the holder is designed to accept specific orifice sizes so flame characteristics remain consistent with the appliance’s gas type and burner design.
Operationally, this part directly affects ignition reliability and flame shape: a cracked insulator, loosened orifice, or a shifted electrode gap will produce delayed ignition, continuous sparking, or a weak/unstable flame. During diagnosis, verify the electrode gap and secure mounting, clean carbon or grease deposits that can shunt the spark, and confirm the orifice size matches the appliance’s gas type-match the correct orifice size for Natural vs LP gas. Typical service actions include replacing the assembly if the ceramic is damaged or the orifice cannot be held squarely in position; always cross-reference the appliance model number to confirm compatibility before installation.
- Common symptoms: no ignition, continuous clicking, intermittent ignition, uneven flame shape, or unusually large/small flame height.
- Key checks: electrode gap, ceramic integrity, orifice seating, and secure mounting to the burner box.
- Practical example: swapping to the correct LP orifice in the holder restores expected flame size after conversion from natural gas.
| Item | Description |
|---|---|
| 316272000 | Igniter electrode and orifice holder assembly for select Frigidaire gas ranges and cooktops; ceramic-insulated electrode, orifice clip, and mounting bracket-confirm model compatibility and orifice sizing before replacement. |
How the 316272000 Frigidaire Igniter and Orifice holder Operates Within the Burner Assembly
The 316272000 Frigidaire Igniter and Orifice Holder combines the igniter element and the machined orifice mounting into a single unit that both positions the ignition source and meters the gas flow at the burner port. Within the burner assembly the holder locates the orifice relative to the burner ring and secures the igniter tip to maintain a consistent spark or glow gap; this mechanical relationship directly influences ignition reliability, flame shape, and combustion stability.Technicians will recognize that small deviations in orientation, a partially blocked orifice, or a cracked ceramic insulator change the gas/air mixing and often manifest as delayed ignition, unstable flame, or burner noise rather than an electrical fault alone.
During operation the valve opens and gas is delivered through the orifice held by the 316272000 unit while the igniter provides the energy to initiate combustion; the holder must thus provide rigid alignment, thermal isolation for the igniter, and a leak-free seating for the orifice. In practice this means installers should confirm correct seating torque on the holder, secure electrical connection to the igniter lead, and proper clearance from the burner cap so the spark or hot surface contacts the gas plume; typical failure modes include misalignment, erosion of the orifice bore, and electrical degradation of the igniter, each producing distinct symptoms that guide diagnosis.
- Precise alignment of igniter tip to orifice for repeatable ignition
- Integration of gas metering and igniter mounting to simplify replacement
- Thermal and electrical isolation to protect the igniter element
- Common failure indicators: delayed ignition, weak flame, or white/sooty combustion residues
| Item | Description |
|---|---|
| Function | Positions the igniter and secures the orifice to meter gas flow and enable ignition |
| Typical symptom of failure | Intermittent ignition, prolonged sparking, or uneven/low flame |
| Compatibility notes | Designed for specific Frigidaire burner assemblies; confirm model fitment and orifice size before replacement |
Common Failure Symptoms and Measurable Indicators of Igniter and Orifice Holder Faults
The 316272000 Frigidaire Igniter and Orifice Holder is an integrated component that both positions the gas orifice and provides the ignition source required to light the burner. The igniter may be a spark electrode or a hot surface element depending on the appliance design; the orifice holder secures the orifice and maintains the proper gap and alignment relative to the burner so gas mixes and ignites reliably. Functionally,the assembly must match the valve outlet thread,mounting flange,and electrical connector used by the specific Frigidaire range or oven model; mismatches in orifice size or mounting geometry will alter flow rates,flame shape,and ignition behavior even if the igniter itself functions correctly.
Technically useful measurable indicators include electrical continuity and resistance of the igniter circuit, presence and timing of a spark or glow, and flame characteristics under steady-state operation. Practical diagnostics for technicians include: measuring voltage at the igniter connector during a call for heat, checking igniter resistance with a multimeter and comparing to manufacturer service data, timing ignition delay (seconds from command to flame), and inspecting the orifice for blockages or wear that reduce flow. For example, a persistent ignition delay or a weak, lifting flame often points to reduced orifice flow or a deteriorating igniter output, while continuous clicking with no flame indicates either absent gas flow or an electrode grounding fault; swapping a known-good igniter or measuring manifold pressure with a manometer helps separate electrical and gas-flow causes.
- No ignition or prolonged ignition delay
- Continuous clicking without flame
- Weak, yellow, or lifting flame
- Visible soot or incomplete combustion
- Intermittent operation that clears after tapping the orifice area
| Item | Description |
|---|---|
| Continuity / Resistance | Open circuit or resistance outside manufacturer range indicates a failed igniter element or damaged wiring. |
| Ignition delay | Measured seconds from command to sustained flame; prolonged delay suggests weak igniter output or reduced gas flow. |
| Flame appearance | Short, yellow, or lifting flame points to inadequate orifice flow or air/gas mixture issues. |
Compatibility, Replacement Criteria, and Installation Requirements for the 316272000 Frigidaire Igniter and Orifice Holder
The 316272000 Frigidaire Igniter and Orifice Holder integrates the mechanical support for the burner orifice with the positional support for the igniter element so the ignition energy is delivered consistently at the correct gas jet. In operation the metal holder secures the orifice to the burner box while the ceramic insulated section fixes the igniter gap and isolates the high-voltage lead from the chassis; correct alignment and orifice sizing control gas flow rate and flame shape. Compatibility requires matching the holder’s mounting footprint, orifice thread/size and the igniter connection style to the appliance model and the fuel type (natural gas vs. LP), so confirm the range model and service manual before ordering replacement parts.
- Compatibility checks: appliance model number, orifice size for fuel type, mounting hole spacing, and igniter lead connector type.
- Typical failure indicators: intermittent spark, continuous clicking with delayed light-off, weak or lifting flame, visible ceramic cracking or corrosion.
- Functional requirements: proper orifice seating, secure screw torque, and OEM-specified igniter-to-orifice gap maintained.
Replace the assembly if the ceramic insulator is cracked, the orifice is eroded or clogged, or if mechanical deformation prevents a gas-tight seat; loose mounting or degraded electrical insulation are also valid replacement criteria because they directly affect ignition reliability and safety. During installation, shut off gas and electrical power, install the correct orifice for the fuel being used, secure the holder so the orifice is concentric with the burner port, route and reconnect igniter leads without kinking, and perform a pressure/soap bubble leak test followed by observation of flame color and pattern to verify proper combustion. Technicians should reference the appliance service manual for torque values and the specified igniter gap rather than relying on visual judgment alone.
| Item | Description |
|---|---|
| Part number | 316272000 |
| Function | Secures burner orifice and positions/insulates igniter for reliable ignition |
| Compatible fuels | Natural gas or LP (requires correct orifice insert) |
| Mounting | Screw-mounted to burner box; must match appliance mounting footprint |
| installation notes | Shut off gas/power,install correct orifice,maintain OEM gap,torque screws,leak test and observe flame |
Q&A
What is the 316272000 Frigidaire Igniter and Orifice Holder?
The 316272000 is an OEM replacement assembly for many Frigidaire gas ranges/ovens that combines the hot-surface igniter (glow bar) with the orifice holder (the bracket that positions the gas orifice/jet and burner tube). It is indeed designed to replace a worn or damaged igniter/orifice assembly so the burner can light reliably.
How do I know if the igniter/orifice holder is the problem with my oven?
Common symptoms include: oven burners that don’t light at all, burners that take a long time to light, the igniter glowing but no gas flow, or uneven/fluctuating flame.A weak igniter can glow but not draw enough current to open the gas valve. Clogged orifice holders can restrict gas flow. Confirming the fault usually requires a combination of visual inspection and electrical testing.
How can a technician test the igniter safely?
A technician will first cut power and gas to the appliance, then inspect visually for cracks, soot, or damage. An initial electrical check is to measure resistance across the igniter with a multimeter (cold resistance reading is often in the low tens to low hundreds of ohms depending on model). A definitive test of igniter performance is measuring the current draw when the igniter is powered (it must draw the rated current to open the gas valve). Live current testing should only be done by someone qualified, as it involves powered circuits and gas safety risks.
Is the 316272000 interchangeable with aftermarket parts or other frigidaire part numbers?
316272000 is an OEM part number; some aftermarket suppliers make compatible assemblies, and there may be cross-reference part numbers for other Frigidaire/Frigidaire Gallery or Kenmore ranges. Always confirm fit by checking the appliance model number and the supplier’s compatibility list. Using OEM or certified replacement parts is recommended to ensure correct gas flow and safe operation.
Can I clean the orifice holder rather of replacing the part?
Minor obstructions in the orifice or burner tube can sometimes be cleared with careful cleaning. However, if the orifice holder is corroded, cracked, or physically damaged, replacement is the safer option. If uncertain, replace the assembly-it’s inexpensive compared with the safety risk of a compromised gas path.
How arduous is installation and what safety precautions should I take?
Installation difficulty ranges from moderate to advanced depending on your experience. Important safety steps: turn off the gas supply and disconnect electrical power before starting, avoid damaging the fragile igniter element, and ensure correct orientation of the orifice and secure connections. Because this is a gas-related part,if you are not comfortable or qualified,have a licensed technician perform the replacement and pressure/leak test afterward.
Will replacing the igniter/orifice holder fix all ignition problems?
Replacing a failed igniter/orifice assembly will fix issues caused by a defective igniter or a damaged/clogged orifice holder. Though, ignition problems can also be caused by faulty gas valves, thermostats, wiring, control boards, or safety interlocks. If replacing the assembly doesn’t solve the problem,further diagnosis of the gas valve,control circuitry,and wiring is required.
Where can I buy a genuine 316272000 and is there a warranty?
Genuine 316272000 parts are available from Frigidaire-authorized parts dealers, major appliance parts retailers, and some online marketplaces. When purchasing, check that the seller specifies “OEM” or “Genuine Frigidaire.” Warranty coverage varies by seller and part-check the vendor’s return policy and any manufacturer warranty; many OEM parts come with a limited warranty against defects.
The Conclusion
The 316272000 Frigidaire igniter and orifice holder is a critical component in gas appliances, combining the ignition source and precise gas flow alignment to ensure reliable flame initiation and steady burner performance. Proper functioning of this assembly supports efficient combustion, consistent cooking or heating results, and contributes to overall appliance safety by helping to maintain correct ignition timing and stable flame characteristics.
As symptoms of ignition or gas flow problems can be similar to other failures, accurate diagnosis is essential before deciding on replacement. Timely identification of a faulty igniter or orifice holder helps prevent recurring malfunctions, reduces the risk of secondary damage to adjacent components, and preserves energy efficiency. When replacement is warranted, using the correct part and following manufacturer-recommended procedures or engaging qualified service personnel helps restore intended performance and maintain safe operation.
the 316272000 Frigidaire igniter and orifice holder plays an important role in appliance reliability and safety. Careful troubleshooting and appropriate replacement when necessary support long-term performance, efficient operation, and user confidence in the equipment.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
The Blincoo Elite 48" Heavy Duty Dog Rope Toy is made for large breeds that love tug-of-war, chewing, and active play. Strong, simple, and fun for powerful dogs.
Shop on TikTok