316011200 Frigidaire Oven Top Burner Ignitor is a service replacement ignitor assembly designed for gas cooktop burners on Frigidaire ranges. It is an ignition component-typically an electrode or hot-surface element with its mounting bracket and connector-that produces the required energy to ignite burner gas when commanded by the appliance control system.
Within the appliance, the ignitor interfaces directly with the range’s ignition control circuit, wiring harness, and gas valve assembly. When the user calls for a burner, the control board or valve control sends voltage to the ignitor, wich either generates a spark or reaches a temperature sufficient to light the gas; successful ignition is then verified by flame presence and, in some designs, a flame sensing circuit. The ignitor is mounted at or near the burner head beneath the cooktop surface and is critical to safe, reliable ignition because it initiates combustion and works in concert with valve timing, flame sensing, and safety interlocks to prevent unregulated gas flow.
This article will describe the 316011200 ignitor’s function and expected electrical and mechanical characteristics, identify common compatible Frigidaire appliance models and mounting considerations, outline typical failure symptoms (such as no spark or prolonged ignition, continuous clicking, or visible damage), and provide guidance on systematic troubleshooting and practical replacement considerations for technicians and appliance owners. Safety implications, connector and harness checks, and verification tests that help distinguish ignitor faults from control board or valve issues will also be covered to support informed repair decisions.
Table of Contents
- Functional role and electrical and performance requirements of the oven top burner ignitor
- How the 316011200 Frigidaire Oven Top Burner Ignitor operates within the oven ignition system
- Common failure modes and diagnostic symptoms of the oven top burner ignitor
- Replacement specifications, compatibility checks and safe installation procedure for the 316011200 ignitor
- Q&A
- To Wrap It Up
Functional role and electrical and performance requirements of the oven top burner ignitor
the 316011200 Frigidaire Oven Top Burner Ignitor is a ceramic-insulated electrode assembly that provides the high-voltage spark required to ignite the gas at a surface burner. In operation the ignitor must create a consistent, repeatable spark at the burner head while withstanding elevated temperatures and the mechanical stresses of normal range use; erratic or weak sparking typically indicates electrode wear, ceramic damage, or an electrical connection issue. This part interfaces directly with the appliance ignition module and the burner cap/ground plane, so correct mechanical alignment and a clean electrode surface are necessary for reliable ignition across compatible Frigidaire range models.
Electrical and performance characteristics focus on reliable high-voltage conduction, proper insulation, and stable mechanical mounting. Technicians check the ignitor for electrical continuity, secure connector pins, and absence of ceramic cracks or conductive tracking; verify the electrode-to-ground gap and confirm the ignition module is supplying pulses at the expected interval. Practical troubleshooting steps include cleaning carbon deposits from the ceramic, verifying grounding continuity back to the chassis, and substituting a known-good ignition module to isolate the fault. Typical failure modes are no-spark (open circuit or broken lead), intermittent spark (loose connector or cracked insulator), and diminished spark energy (corroded electrode or poor ground).
- Continuity check with a multimeter and inspection for ceramic cracks or carbon tracking.
- Verify secure mechanical mounting and correct electrode-to-burner gap for consistent spark coupling.
- Confirm proper connector seating and grounding to avoid intermittent or weak spark.
| Item | Description |
|---|---|
| Interface | Connects to the range ignition module and requires a reliable ground at the burner assembly. |
| Performance indicators | Consistent, visible spark at the electrode; short ignition times; no arcing along the ceramic. |
| Common tests | Continuity test, visual inspection, and functional substitution with a known-good ignitor or module. |
How the 316011200 frigidaire oven Top Burner Ignitor operates within the oven ignition system
The 316011200 Frigidaire Oven Top Burner Ignitor is a hot-surface ignitor used on gas ranges to initiate oven burner combustion by heating to a visible glow and providing the electrical current path required by the gas safety valve. When energized by the stove’s mains supply, the ignitor’s resistive element heats until it emits a red‑orange glow; during this warm‑up it conducts current that the valve’s control circuit senses. If the ignitor cannot reach the necessary temperature or cannot conduct the minimum current,the safety valve remains closed and no gas is released,so correct electrical and mechanical fitment is essential for reliable ignition behavior.
Functionally the part behaves as a temperature‑dependent resistor whose cold and hot characteristics determine warm‑up time and valve actuation. Technicians typically verify operation by confirming visible glow and by measuring continuity and current draw in circuit; symptoms of degradation include extended pre‑ignition delay, a faint glow, or intermittent lighting. Compatibility is established by matching mounting flange, connector type and electrical characteristics to the oven model-replacing with the same part number or an approved equivalent preserves the intended warm‑up current and timing.Practical checks include measuring line voltage at the ignitor during a call for heat and confirming that the ignitor draws the expected operating current; if voltage is present but the ignitor fails to draw sufficient current, replacement is indicated.
- Primary role: heat to glow and provide current to the gas valve control circuit.
- Common failure signs: long ignition delay, weak glow, or no valve actuation despite power present.
- field tests: visual glow check, continuity/ohms measurement when cold, and current measurement under power.
| Item | Description |
|---|---|
| Function | hot‑surface resistor that heats to ignite gas and supply current to the safety valve circuit. |
| Electrical characteristic | Operates on line supply; behavior defined by cold resistance and hot current draw rather than a simple DC resistance rating. |
| Compatibility notes | Replace with matching part number/mounting and connector to ensure correct warm‑up time and valve actuation. |
Common failure modes and diagnostic symptoms of the oven top burner ignitor
The 316011200 Frigidaire Oven Top Burner Ignitor is a hot-surface ignition element used on compatible Frigidaire cooktops to heat and produce a visible glow that allows the gas valve or spark system to light the burner. In normal operation the element reaches a stable glow within a short, repeatable warm-up interval and presents continuity to the control circuit; compatibility requires matching the ignitor’s mounting flange, lead length, and connector type to the appliance model. As the part ages, its emissive surface can degrade or develop hairline cracks, which change glow characteristics and reduce the current draw needed to operate downstream gas valves or ignition modules.
Typical failure modes include open-circuit element failure, reduced emissivity (weak or non-uniform glow), intermittent continuity, and mechanical damage or contamination that prevents reliable heating. Diagnostic symptoms you will observe are delayed flame ignition, continuous clicking from the spark module while the ignitor fails to glow, burner lighting only after a prolonged delay, or visible dark spots and cracks on the ceramic. Practical diagnostics combine visual inspection with electrical checks: verify continuity across the ignitor, measure for proper voltage at the connector during a call for ignition, and rule out wiring or gas-valve faults before replacing the ignitor.
- Delayed ignition or long warm-up time
- Weak or non-uniform red glow
- Continuous clicking while attempting to ignite
- open circuit or abnormally high resistance on multimeter
- Visible ceramic cracking, chipping, or heavy residue
| Item | Description |
|---|---|
| Continuity | Ignitor should show electrical continuity; an open reading indicates element failure. |
| Glow behavior | Consistent, even red glow within the expected warm-up interval; uneven or dim glow indicates reduced emissivity. |
| Installation fit | Mounting flange, lead length, and connector type must match the appliance model for proper compatibility and grounding. |
Replacement specifications, compatibility checks and safe installation procedure for the 316011200 ignitor
The 316011200 Frigidaire Oven Top Burner Ignitor is a replaceable ignition element designed to initiate combustion at a surface burner by producing a controlled ignition source (spark or hot‑surface glow, depending on model). Technically, the component converts the range’s electrical input into either a high‑voltage discharge at an electrode or a resistive heating element that reaches ignition temperature; replacement compatibility depends on connector type, lead length, mounting bracket geometry and whether the appliance uses spark ignition or a hot surface system. Technicians should confirm the original ignition method before ordering: a visual inspection of the electrode vs. ceramic heating element,and verifying the electrical connector style and mounting hole pattern,are reliable ways to determine a correct match for the 316011200 unit.
Perform compatibility checks and a safe installation in controlled steps: first, disconnect electrical power and shut off the gas supply, then compare the old ignitor to the replacement for identical connector pins, bracket locations and clearance to nearby burner components. Use a multimeter to check for continuity or expected circuit behavior on the ignitor leads before installation; after mechanically installing and reconnecting wiring, restore power and observe ignition behavior (if safe to do so) and perform a gas‑leak check at any disturbed fittings with a soapy water solution. If the ignitor type is a hot surface device, avoid touching the ceramic or heating surface with bare hands to prevent contamination that reduces life; if it is a spark type, verify electrode gap and secure grounding to ensure consistent sparking.
- Verify ignition type (spark vs. hot surface), connector style, lead length and mounting pattern before purchase.
- always cut power and gas before removal; test continuity of old and new ignitors with a multimeter.
- After installation, restore systems and confirm reliable ignition and leak‑free gas connections.
| Item | Description |
|---|---|
| Connector | Match plug style and pin count to ensure electrical compatibility |
| Mounting | Bracket hole spacing and orientation must align with burner assembly |
| Verification | Continuity test and functional ignition check after safe reconnection |
Q&A
What is the 316011200 Frigidaire Oven Top Burner Ignitor and what does it do?
The 316011200 is a replacement ignitor/electrode assembly used on many Frigidaire (and some Kenmore) gas cooktops. It creates the high-voltage spark at a surface burner that ignites the gas when you turn a burner knob. It does not control gas flow – that is done by the valve – but it provides the spark that lights the gas.
What are common symptoms that the ignitor (316011200) has failed?
Typical signs include no spark at a burner, a very weak or intermittent spark, prolonged clicking without ignition, delayed lighting, or visible physical damage to the electrode (chips/cracks/corrosion). If you smell gas and the burner won’t light, stop and get professional help.
Can I replace the 316011200 ignitor myself?
Yes, a competent DIYer can replace it, but follow safety steps: disconnect power to the range and turn off the gas supply, remove grates and burner caps, unfasten the damaged ignitor, disconnect its electrical connector, install the new unit and reconnect, then reassemble. if you’re uncomfortable working with gas or electrical components, hire a qualified appliance technician.
How do I test the ignitor to confirm it’s bad?
Start with simple checks: make sure the range has power, clean and properly position the burner cap, and observe whether a spark appears when the knob is turned. For an electrical check, disconnect power, remove the ignitor and test the electrode assembly for continuity with a multimeter. An open circuit usually indicates a failed ignitor. Note that continuity does not guarantee the unit will produce a proper spark under load, and a faulty spark module or wiring can produce similar symptoms.
Why does the burner click but won’t light even after I replaced the ignitor?
Clicking with no ignition can be caused by several issues besides the electrode: a weak or failed spark/ignition module, loose or corroded wiring connections, misaligned or dirty burner caps/ports, moisture or food debris on the ignitor, or an issue with the gas valve/supply. Troubleshoot by cleaning and drying the burner and ignitor, checking wiring and connectors, testing other burners, and if needed testing or replacing the spark module or calling a technician.
How should I clean and maintain the 316011200 ignitor?
Keep the electrode area free of food, grease and moisture. Use a soft brush or a toothbrush to remove debris gently; avoid bending or striking the ceramic/electrode. Do not soak the ignitor in water, and let the area dry completely before use. Regularly check that burner caps are seated correctly, as misalignment can prevent ignition.
Is the 316011200 ignitor compatible with my Frigidaire model?
Compatibility varies by model. The safest method is to check your appliance’s model number (usually on a sticker behind the oven door,on the frame,or on the back) and look up parts using Frigidaire’s parts lookup or a reputable appliance parts website. Cross-reference part numbers and the shape/connector of the ignitor before ordering.
Were can I buy the 316011200 and what should I expect to pay?
This part is sold through Frigidaire-authorized parts dealers, appliance parts stores, and many online retailers. Prices vary by seller and region; expect a modest cost for the ignitor itself (often in the lower tens of dollars),while labor charges apply if you hire a technician. Buy from reputable sellers, verify the part number and return policy, and prefer OEM or OEM-equivalent parts for best fit and reliability.
To Wrap It Up
The 316011200 Frigidaire Oven Top Burner Ignitor plays a central role in the safe and reliable operation of the cooktop by initiating the burner flame when the control is engaged. As a precision component, it directly affects ignition consistency, cooktop responsiveness, and overall appliance performance; when functioning correctly, it contributes to even heating and predictable cooking results.
Accurate diagnosis is essential when ignition problems arise. Symptoms such as repeated sparking without lighting, delayed ignition, or intermittent operation can indicate a failing ignitor, though similar symptoms may stem from other components or electrical issues. Confirming the root cause through careful testing-using manufacturer guidance or a qualified service technician-helps avoid needless parts replacement and ensures the correct repair approach is taken.
When testing confirms the ignitor is faulty, timely replacement with the correct 316011200 Frigidaire part restores intended performance and reduces potential safety risks. Relying on proper diagnosis and professional installation or following the manufacturer’s instructions preserves appliance reliability and gives the best outcome for continued, safe use of the oven top burner.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
