316011200 Frigidaire Oven Top Burner Ignitor is an appliance ignition component used on Frigidaire gas ovens and ranges; it is indeed the device that provides the initial energy required to ignite the gas at the oven’s top (broil) burner. as an ignition element, it may take the form of a high-voltage spark electrode or a hot-surface/glow ignitor depending on the model, and it is indeed mounted in the burner assembly where it can reliably initiate combustion when the control calls for heat.
Inside the appliance, the ignitor interfaces with the control board or spark module, the gas safety valve, and the burner assembly. When the user calls for the broil function, the control sends a signal to energize the ignitor; the ignitor then either produces a spark or heats to a temperature sufficient to ignite the gas released by the valve. Proper operation depends on correct electrical connections, intact insulation and mounting, and coordinated timing with the gas valve and any flame-sensing or safety interlocks to prevent unignited gas flow.
In this article, readers will find a technical overview of the 316011200 ignitor’s function and typical construction, guidance on determining compatibility with specific Frigidaire models, common failure symptoms to watch for (no ignition, repeated sparking without flame, delayed ignition, visible damage), step-by-step troubleshooting methods including safe electrical checks and visual inspection, and practical replacement considerations such as removal and installation practices, wiring and mounting details, and safety precautions to follow when working on gas appliances. The information is intended to assist technicians, engineers, and informed appliance owners in diagnosing and addressing ignition-related issues safely and effectively.
Table of Contents
- Functional Role and System Integration of the Oven Top burner Ignitor
- How the 316011200 Frigidaire Oven Top Burner Ignitor Operates Within the Ignition Circuit and Gas Valve Assembly
- Common failure Modes and Diagnostic Symptoms for the 316011200 Frigidaire Oven Top Burner Ignitor
- Replacement Considerations, Model Compatibility and Step-by-Step Installation Guidelines
- Q&A
- To Wrap It up
Functional Role and System Integration of the Oven Top Burner Ignitor
The 316011200 Frigidaire Oven Top Burner Ignitor is an ignition electrode assembly that provides the localized electrical discharge required to ignite the gas at a surface burner. In operation, the stove’s ignition module supplies pulsed high-voltage to the electrode, producing a spark across the electrode gap that initiates combustion; reliable ignition depends on correct electrode geometry, clean ceramic insulation, and secure grounding to the burner assembly. Failures typically present as weak or no spark due to worn electrodes, cracked ceramic, carbon tracking, or poor electrical connections rather than failures in the gas valve itself.
Integration with the oven’s ignition and control system requires matching the part’s mechanical mounting, connector type, and electrode position to the burner; technicians should replace the assembly with the exact OEM number or an approved equivalent to maintain alignment and safe distances from the burner head. Practical checks include visual inspection for ceramic damage, continuity and insulation resistance tests with a multimeter, and observing spark formation when the ignition module is actuated; correct installation ensures the ignitor interfaces predictably with the ignition module and flame detection circuitry, reducing misfires and repeated ignition cycles.
- Key features: electrode gap and ceramic insulator, OEM connector type, mounting bracket alignment.
- Common failure modes: ceramic cracks, carbon tracking, connector corrosion, worn electrode tip.
- Compatibility considerations: match part number, electrode length, and connector polarity to the appliance harness.
| Item | Description |
|---|---|
| Function | Produces spark at the burner by providing an insulated electrode that the ignition module energizes. |
| Electrical interface | Connects to the oven’s ignition module via a specific plug/harness; requires a secure ground through mounting. |
| Mounting | Bracket and electrode position must align with the burner head to create a consistent spark gap. |
| Failure indicators | Intermittent or absent spark, visible ceramic damage, or corrosion at the connector. |
How the 316011200 Frigidaire Oven Top Burner Ignitor Operates Within the Ignition Circuit and Gas Valve Assembly
The 316011200 Frigidaire Oven Top Burner Ignitor is a hot-surface ignitor used in the ignition circuit to bring the gas valve assembly to a state where the valve will open and allow fuel flow. When the oven control applies line voltage, the ignitor heats to a bright orange glow and draws a steady current; the gas valve is engineered to remain closed until that current reaches the threshold required by its coil/sensing circuit. In practice this means the ignitor functions as both the heat source for ignition and as a current-sensing element in series with the gas valve: if the ignitor never reaches its operating temperature (or its resistance rises), the gas valve will not energize and no gas will flow, preventing ignition.The part is intended to match original electrical and mounting characteristics on Frigidaire ranges that use this component, so replacements maintain the same interaction with the control board and valve assembly mechanics.
Technically, the ignitor is a resistive element that exhibits a low cold resistance and then stabilizes at a higher hot resistance while drawing several amps of current during the burner start period; the control board or gas valve responds to that current profile. Common failure modes are open-circuit, increased resistance (a weak glow with insufficient current), or short-to-ground, each producing diagnostic symptoms such as no glow, a clicking valve with no gas flow, or blown fuses. Technicians confirm function with an ohmmeter and by observing the glow during a start cycle; replacing the ignitor typically resolves cases where the valve clicks but the burner never lights. Practical checks and symptoms include:
- Resistance measurement: open circuit or substantially higher than expected indicates a failed element.
- Visual check: no glow or a faint glow under load indicates insufficient current draw.
- Behavioral symptom: gas valve clicking repeatedly without flame suggests a weak ignitor.
| Item | Description |
|---|---|
| Function | provides heat for ignition and current draw required for gas valve actuation |
| Typical operating behavior | Cold low resistance,heats to glowing state and draws several amps to enable valve |
| Diagnostic checks | Ohmmeter resistance check and visual glow inspection under applied voltage |
Common Failure Modes and Diagnostic Symptoms for the 316011200 Frigidaire Oven Top Burner Ignitor
The 316011200 Frigidaire Oven Top Burner Ignitor is a hot-surface ignition element used in compatible Frigidaire gas ranges to initiate combustion for a top burner or broil assembly. It functions by heating to a visible glow when the range controller applies line voltage; once the ignitor reaches its designed temperature it allows sufficient current flow to the gas valve circuit (or provides the thermal/voltage characteristics expected by the control module) so the valve will open and the burner will light. Physically the part is an OEM-style replacement with specific mounting tabs and connector types, so correct fit and connector polarity should be verified against the appliance model before installation to ensure proper function and safety.
Failures of this ignitor present predictable electrical and visual symptoms that guide troubleshooting. Common failure modes include an open filament (no glow and no continuity), partial degradation (weak glow caused by increased resistance and longer valve proving times), and connector or wiring faults (intermittent operation or arcing). Diagnostic checks that technicians use are visual inspection for cracks and soot, continuity/resistance measurement across the element, and verifying line voltage at the ignitor during a call for heat; a meter reading that shows no voltage at the ignitor pin points to control or wiring faults rather than the ignitor itself. Practical examples: a burner that produces a persistent gas smell with delayed ignition frequently enough indicates a slow-heating ignitor with elevated resistance, while a burner that never glows typically indicates an open ignitor or a failed control/ignition relay.
- No glow – open circuit within the ignitor or absent supply voltage.
- Weak or delayed glow – partial degradation/increased resistance causing delayed valve operation.
- Intermittent glow or arcing - corroded connectors, damaged insulation, or loose wiring.
- Burner lights but cycles or sputters - unstable valve operation possibly aggravated by marginal ignitor performance.
| Item | Description |
|---|---|
| Symptom | no visible glow; burner does not light |
| Likely cause / check | Measure continuity across ignitor and verify line voltage during call for heat; if ignitor is open, replace; if no voltage, trace control/wiring. |
Replacement Considerations,Model Compatibility and Step-by-Step Installation Guidelines
The 316011200 Frigidaire Oven Top Burner Ignitor is a hot-surface ignition element designed to reach operating temperature quickly and allow the gas valve to open for burner ignition. In operation the element must both present continuity and heat to the specified glow temperature; a failed element will either not glow (open circuit) or draw abnormal current (partial failure) that prevents proper valve operation. Technicians verify behavior with a visual glow check, a DC/AC voltage supply test at the connector, and an ohmmeter continuity check before ordering a replacement, since physical mounting orientation, lead length, and connector type affect fit and function on different range models.
Replacement requires confirming model compatibility and following conservative installation procedures: match the 316011200 mounting hole pattern and two‑pin connector to the appliance model number,and check that the element’s exposure to the burner orifices is identical to the original to ensure stable flame characteristics. For installation, isolate electrical and gas supplies, remove protective panels to access the burner assembly, support the ignitor to avoid brittle fracture when detaching leads, and verify proper flame establishment and valve operation after reassembly; if flame is weak or intermittent, recheck element alignment and connector continuity rather than assuming a second component failure.
- Verify model and part cross‑reference, shut off power/gas, remove grates and access panels.
- note original ignitor orientation, disconnect wiring, and remove mounting screws; handle the replacement by the base, not the ceramic element.
- Install new ignitor, reconnect leads ensuring secure spade fit, restore power/gas, and perform a live test for glow and stable ignition.
| Item | Description |
|---|---|
| Part number | 316011200 Frigidaire oven top burner ignitor (hot-surface type) |
| Connector | Typically 2‑pin spade; confirm shape and pitch against original |
| Mounting | Match hole spacing and bracket orientation to maintain correct element exposure |
| Common symptoms | No glow, slow ignition, or intermittent flame leading to safety valve not opening |
| Field tests | Continuity with ohmmeter, visual glow on 120V supply, and connector voltage under call for gas |
Q&A
What is the 316011200 Frigidaire Oven Top Burner Ignitor and what does it do?
The 316011200 is an OEM replacement ignitor used on many Frigidaire gas ranges/cooktops. It is the small electrode assembly that creates the spark (or in some cases provides a hot-surface ignition) to light the top burners. Its job is to deliver the spark to the burner so gas can ignite safely and reliably.
How do I no if the ignitor is failing or needs replacement?
Common symptoms of a failing ignitor include: burners that won’t light even though you hear clicking, inconsistent or weak sparking, continuous clicking after the burner is lit, visible damage to the electrode or ceramic insulator (cracks/corrosion), or a burner that lights only with a match. If the ignitor shows physical damage or does not produce a spark when the knob is operated, it likely needs replacing.
Can I test the 316011200 ignitor myself, and how?
Yes. First, always disconnect power and gas before any testing. For spark-type (electrode) ignitors you can visually check for a spark when the burner control is turned to light (reconnect power only for this observation and stand back). With power off, you can check the harness and wiring for continuity/secure connections using a multimeter; if the ignitor is open (no continuity) it’s bad. Do not attempt to probe or measure the high-voltage spark while the unit is energized-this is hazardous. If unsure, hire a qualified technician.
How difficult is it to replace the ignitor and what tools are needed?
Replacement is generally a moderate DIY job for someone cozy with basic appliance work. Tools commonly required: screwdriver or nut driver set, needle-nose pliers, and a multimeter (optional). Typical steps: turn off gas and power, remove grates and burner caps, remove screws/fasteners holding the ignitor, disconnect the harness, install the new ignitor, reassemble and restore power/gas.Most replacements take 15-60 minutes depending on the model and access.
do I need to adjust anything after installing the new ignitor?
After installing, check that the electrode tip is positioned correctly and not touching the burner or grounded metal.The spark gap (distance from electrode tip to burner base/ground) should be small-typically around 1/8 inch (about 3 mm)-but follow your model’s service instructions if available. Verify each burner lights reliably and that the ignitor stops clicking after flame establishment.
Is the 316011200 compatible with all Frigidaire ranges?
Not necessarily. The 316011200 fits many Frigidaire models but not every range. Always verify compatibility by checking your appliance model number (usually on a tag inside the oven door frame or behind the broiler drawer) and cross-referencing it with the part listing or the manufacturer. If in doubt, contact Frigidaire support or the parts supplier with your model number.
Are there safety precautions I should follow when replacing the ignitor?
Yes. Turn off electrical power and the gas supply before beginning. Avoid touching live high-voltage ignition components. Do not attempt to measure the spark circuit while it is indeed energized with metal probes. Replace cracked or damaged ceramic and ensure wiring connectors are secure and insulated. If you smell gas or are unsure about any step, stop and call a qualified appliance technician.
How much does the 316011200 part cost and where can I buy it?
prices vary by supplier and region; aftermarket and OEM options are available. You can purchase it from authorized Frigidaire parts dealers,major appliance parts retailers,or reputable online marketplaces. When buying, confirm the exact part number and your appliance model to ensure a correct fit.Consider purchasing OEM if you want guaranteed compatibility and warranty coverage.
To Wrap It Up
The 316011200 frigidaire Oven Top burner Ignitor is a critical component responsible for initiating combustion at the oven’s top burners. By producing the spark or heat necessary to light the gas, this ignitor directly affects burner responsiveness, consistent flame ignition, cooking performance, and overall appliance safety. Proper function of the ignitor helps maintain efficient operation and reduces the risk of delayed ignition or gas buildup.
Accurate diagnosis is critically important when oven ignition problems arise, as symptoms can stem from the ignitor itself or from related systems such as gas supply, valves, or electrical connections. When testing and inspection indicate that the 316011200 ignitor is faulty,timely replacement with the correct part restores reliable operation and helps prevent further wear or safety concerns. Using the appropriate replacement part and following recommended procedures ensures compatibility and long-term performance.
For users and service professionals alike, prioritizing careful diagnosis and proper replacement preserves appliance efficiency and safety. Whether handled by a qualified technician or a knowledgeable homeowner following manufacturer guidance, replacing a defective ignitor is a practical step to maintain consistent cooking results and reduce the potential for operational issues in the future.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
