316272000 Frigidaire Igniter and Orifice Holder is a combined igniter-mounting and orifice-retention component used in Frigidaire gas cooking appliances. It is indeed a mechanical and electrical assembly that secures the igniter in the correct position relative to the burner port while holding the gas orifice in place, providing the physical alignment necessary for reliable ignition. As a discrete service part, it replaces worn or damaged mounting hardware that can lead to misalignment or gas flow issues.
inside an appliance, the igniter and orifice holder interfaces directly with the burner tube, the gas orifice, the oven or range ignition system, and the appliance chassis. It ensures the igniter electrode or hot-surface element is positioned to create a consistent spark or heat source at the burner port while maintaining proper spacing and gas jet alignment. Because it affects flame initiation and stability, it is functionally connected to the gas supply system, the ignition control module, and any downstream flame detection or safety devices used by the appliance.
In this article readers will find a technical overview of the part’s function and design, guidance on model compatibility and inspection of physical and electrical connections, common failure symptoms such as delayed or absent ignition and uneven flames, systematic troubleshooting steps to isolate mounting, orifice, and igniter faults, and practical replacement considerations including part verification, mounting torque, sealing and alignment checks, and basic safety precautions to use when servicing the gas circuit. The aim is to provide technicians, engineers, and appliance owners with the context needed to diagnose issues and determine when repair or replacement of the 316272000 assembly is appropriate.
Table of Contents
- Functional Role of the Igniter and Orifice holder in Frigidaire Gas Appliances
- How the 316272000 Frigidaire Igniter and Orifice Holder Works inside the Appliance
- Common Failure Symptoms and Diagnostic Indicators for the igniter/Orifice Assembly
- Replacement Considerations, Model Compatibility, Installation and Troubleshooting Procedures
- Q&A
- Insights and Conclusions
Functional Role of the Igniter and Orifice Holder in Frigidaire Gas Appliances
The 316272000 Frigidaire Igniter and Orifice Holder combines the ignition source and the precision gas-jet mounting into a single serviceable assembly. The igniter provides the energy required to start combustion – either as a hot-surface element or a spark type depending on the specific appliance model – while the orifice holder secures the metering orifice and establishes the gap and alignment between the gas jet and burner. Correct mechanical location, seal integrity, and electrical connection within the assembly determine ignition timing and flame stability; a misaligned orifice holder or a degraded igniter will produce delayed ignition, flashback, or intermittent lighting even when the gas valve functions normally.
Technicians evaluate this assembly by checking igniter continuity or glow behaviour, verifying that the orifice is the correct diameter for the fuel type, and confirming that the holder seats and seals without gas leakage. Practical examples include replacing the assembly when a hot-surface element no longer reaches ignition temperature, or swapping the orifice (while using the same holder) during a natural-gas-to-LP conversion to obtain the correct jet size. Common field indicators that point to the assembly-rather than upstream valve or control issues-are persistent clicking without ignition, a weak or yellow flame at the burner, or visible soot around the orifice interface.
- Persistent clicking with no ignition
- Delayed or intermittent flame establishment
- Yellow, sooty, or unstable flame
- Gas odor near the burner or loose mounting at the orifice
| Item | Description |
|---|---|
| Igniter | Produces ignition energy (hot-surface or spark) and must meet electrical/resistance specifications for reliable ignition timing. |
| Orifice holder | Positions and seals the metering orifice, enforces correct orifice-to-burner spacing, and accommodates the specific orifice diameter required by fuel type. |
How the 316272000 Frigidaire Igniter and Orifice Holder Works Inside the Appliance
The 316272000 Frigidaire Igniter and Orifice Holder serves two coordinated functions inside a gas cooking appliance: it physically locates and secures the gas orifice while positioning the igniter electrode or element so ignition occurs reliably at the burner port. the part holds the metering orifice in a fixed relationship to the burner head and provides the electrical mounting and connector for the igniter. When the control calls for heat, the igniter produces the ignition energy (spark or hot surface) at the correct position relative to the gas jet; this alignment minimizes delayed ignition and flashback by ensuring the fuel/air mixture encounters the ignition source instantly as gas is released through the orifice.
Behavior and compatibility are defined by mechanical fit, orifice size, electrode spacing, and electrical connector type. Technicians should verify that the 316272000 Frigidaire Igniter and Orifice Holder matches the appliance’s mounting flange and terminal configuration and that the orifice diameter corresponds to the appliance’s rated BTU; incorrect orifice sizing or a misaligned electrode gap (electrode gap) will produce weak flames, repeated clicking without ignition, or soot buildup. Simple diagnostics that indicate replacement include intermittent ignition,continuous sparking while gas is visible at the burner,or visible corrosion/damage at the holder; proper replacement requires securing the holder to restore alignment and confirming electrical continuity and correct gap before returning the appliance to service.
- Primary functions: orifice alignment, igniter mounting, electrical connection, thermal isolation
- Common failure modes: misalignment, corroded terminals, cracked insulator, incorrect orifice size
- Practical checks: verify fitment, measure continuity, inspect electrode spacing, confirm gas pressure and flow
| Item | Description |
|---|---|
| Function | Secures the gas orifice and positions the igniter electrode for reliable ignition |
| Typical symptoms of failure | Intermittent or no ignition, continuous sparking, delayed flame, soot or yellowing |
| Compatibility notes | Match mounting pattern, orifice size (BTU rating), and electrical terminal type to the appliance model |
Common Failure Symptoms and Diagnostic Indicators for the Igniter/Orifice Assembly
The 316272000 Frigidaire Igniter and Orifice Holder is a combined mechanical and electrical subassembly that positions the igniter electrode relative to the orifice and provides the mounting interface to the burner tube. Its functions include maintaining the correct spark gap and physical alignment, insulating the high-voltage feed, and stabilizing the orifice so that gas flow meets the designed jet geometry.Compatibility relies on matching the OEM part number, flange dimensions, and electrode orientation; an or else identical-looking holder can still cause misfires if the electrode sits even a few millimeters out of specification or the mounting allows the orifice to rotate relative to the burner head.
- Repeated clicking with no ignition on a single burner
- Intermittent ignition or delayed light after several clicks
- Weak, wavering, or yellow flame localized to the affected burner
- Visible corrosion, carbon tracking, melt marks, or loose electrical connector
- Open circuit or unexpectedly high resistance measured across the igniter lead
Diagnosing failure combines visual inspection, electrical checks, and flame observation. Visually inspect the holder for cracked ceramic, conductive deposits, or a displaced electrode; carbon tracking across the insulator frequently enough indicates high-voltage breakdown and intermittent spark paths. Electrically, check for continuity from the spark lead to the electrode and ensure the connector is secure; a complete open or a sudden rise in resistance indicates internal damage or a broken lead. observe the flame pattern during a controlled test: a correct assembly produces a stable blue flame concentrically around the orifice; a distorted flame, gas smell prior to ignition, or flame lifting suggests misalignment or partial blockage. In practice, technicians replace the 316272000 assembly when a combination of abnormal flame behavior, failed continuity tests, and visible mechanical damage are present rather than relying on a single symptom.
| Item | description |
|---|---|
| Continuity / Resistance | Igniter circuit should show continuity; an open circuit or rapidly changing resistance points to a fractured lead or internal fault. |
| Spark Position | Electrode-to-orifice gap and orientation must match OEM specification to ensure reliable ignition and correct flame shape. |
| Physical Condition | Cracks,carbon tracking,or melted plastic at the holder indicate high-voltage leakage or overheating and warrant replacement. |
| Flame Pattern | Blue, centered flame indicates good alignment; yellowing, lifting, or uneven flame suggests obstruction or misalignment of the orifice/holder. |
Replacement Considerations, Model Compatibility, Installation and Troubleshooting Procedures
The 316272000 Frigidaire Igniter and Orifice Holder secures the gas orifice and positions the ignition electrode so that spark energy and fuel flow coincide at the burner port. In service, the holder must maintain a mechanically stable mount and repeatable electrode-to-orifice geometry; misalignment, ceramic cracking, or corroded contacts will reduce spark transfer and cause delayed ignition, continuous sparking, or a complete failure to ignite. This assembly interfaces directly with the range manifold and the spark module/ignition transformer, so compatibility depends on matching the manifold flange, orifice thread size, and electrode routing used on the specific Frigidaire cooktop model rather than just the visual appearance of the part.
Installation and troubleshooting are focused on mechanical alignment, electrical continuity, and flow path integrity. Before any intervention, shut off gas and electrical power, then confirm the orifice size, seating orientation, and that the electrode tip is free of carbon buildup or moisture. Technicians should check wiring harness continuity and inspect the igniter for ceramic damage; for spark-type igniters, the presence of high-voltage from the module is verified at the connector while observing safe clearances, whereas the orifice holder should be inspected for blocked passages, correct seating torque, and sealing. Practical examples: a burner that clicks continuously after being turned off frequently enough indicates moisture or a shorted electrode; a burner that lights intermittently but with delayed ignition often indicates a partially obstructed orifice or a slightly shifted electrode position.
- common symptoms: no spark, continuous sparking, delayed ignition, visible electrode/chip damage.
- Basic diagnostic steps: power/gas off → visual inspection → check wiring continuity → verify electrode position and orifice cleanliness → reassemble and test under controlled conditions.
- Replacement checks: confirm manifold flange compatibility and orifice thread, use correct gasket/seal, and follow torque specifications to avoid distortion.
| Item | Description |
|---|---|
| Part number | 316272000 (igniter + orifice holder assembly) |
| Function | Aligns ignition electrode with gas orifice and secures orifice to the manifold |
| Materials | Ceramic insulator for electrode, stainless/galvanized steel holder |
| Compatibility | Select Frigidaire ranges and cooktops that share the same manifold mounting and orifice specifications; verify against appliance model number |
Q&A
What is the Frigidaire 316272000 igniter and orifice holder and what does it do?
The 316272000 is an OEM igniter and orifice holder assembly used on certain Frigidaire gas ranges and cooktops. The orifice holder positions the burner orifice (metering jet) that controls gas flow to the burner and the igniter is the spark electrode that produces the spark to ignite that gas. Together thay align the gas jet and the spark so the burner lights reliably.
How can I tell if the 316272000 is failing and needs replacement?
Common signs of a failing igniter/orifice holder are: continuous clicking with no visible spark, intermittent ignition, a weak or yellow/lifted flame, or no ignition at all. Physical damage (cracked or glazed electrode, bent tip, or corroded contacts) or clogged orifice ports are additional indicators. If cleaning does not restore normal operation, replacement is usually required.
Is this part compatible with my Frigidaire range or cooktop?
Compatibility depends on the exact model of your appliance. Verify by matching the appliance model number (found on the range frame or behind the oven door) to the parts diagram in the manual or an online parts lookup.316272000 is an OEM Frigidaire part that fits multiple models, but always confirm fitment before buying.
can I test the igniter/orifice holder before replacing it?
Yes. For a spark-type igniter, you can observe whether a spark appears at the electrode when the burner control is operated (do this safely with the gas off and power on to the igniter).Avoid touching the electrode while testing.For hot-surface igniters (different type), you can measure resistance with a multimeter-typically tens to hundreds of ohms-whereas spark electrodes will not show the same resistance reading. If you don’t see a spark or see visible damage,replacement is indicated. If unsure which igniter type you have,consult the model’s service manual.
How do I safely replace the 316272000 assembly?
Turn off the gas supply and disconnect electrical power to the appliance before starting. Remove burner caps or the cooktop to access the assembly, disconnect the igniter wiring harness, and unfasten the screws holding the orifice holder. Swap in the new assembly, reconnect wiring, restore power and gas, and test for proper ignition. After installation, check for gas leaks at the connection using a soapy-water solution or a commercial leak detector. If you are not pleasant working on gas appliances, hire a qualified technician.
How should I clean and maintain the igniter and orifice holder to avoid ignition problems?
Keep the electrode tip and the orifice area free of food, grease, and debris. Use a soft brush or compressed air to remove loose debris and a damp cloth with mild detergent for sticky residue. Do not use abrasive tools on the electrode or poke large objects into the orifice (which can alter orifice size).Periodic cleaning and avoiding spills will reduce ignition issues.
What causes an orifice to clog and what is the correct way to clear it?
Orifices can clog from food debris, grease, insect nests, or mineral deposits from contaminated gas. For light clogs, remove the orifice holder and use compressed air or a soft, non-metallic pick to dislodge debris. Avoid enlarging or reshaping the orifice with wire or drills-altering the orifice changes gas flow and can create unsafe conditions; if you cannot clear it safely, replace the orifice or the entire assembly.
Should I replace the 316272000 myself or call a professional?
If you have experience working safely with gas appliances, can shut off gas and power, and have basic hand tools, this is a job many DIYers can complete. However, because improper installation risks gas leaks, fire, and carbon monoxide hazards, call a licensed appliance technician if you are unsure, if local codes require a licensed installer, or if leak testing or regulator adjustments are needed after replacement.
Insights and Conclusions
The 316272000 Frigidaire igniter and orifice holder is a small but critical component in gas cooking appliances, combining the spark-generating function with precise gas delivery positioning to ensure reliable ignition, consistent flame characteristics and efficient burner performance. Its correct condition and alignment directly affect cooktop responsiveness, fuel efficiency and safety by promoting complete combustion and minimizing ignition delays or misfires.
Because symptoms of a failing igniter or orifice holder can resemble other burner or control issues,careful diagnosis is essential: visual inspection,functional testing of ignition cycles and verification of part compatibility with the appliance model help determine whether replacement is necessary. When replacement is required, using the correct OEM or equivalent-quality part and ensuring proper installation help restore intended performance and reduce the likelihood of repeat service.
maintaining the 316272000 igniter and orifice holder in good working order supports safe, efficient operation of Frigidaire gas appliances. Timely, accurate diagnosis and professional or qualified replacement-following manufacturer specifications and safety practices-offer the best path to reliable operation and long-term peace of mind for users and service technicians alike.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
