241734001 Frigidaire Refrigerator Ice Bucket is the ice-storage bin assembly used in certain Frigidaire refrigeration models; it is a molded plastic receptacle that captures and contains ice produced by the appliance’s automatic ice maker. As a replaceable service part, the ice bucket provides the structural interface for ice accumulation, supports the auger or paddle mechanism where present, and often includes features such as mounting tabs, a drive coupling recess, and level-actuation surfaces for full/empty sensing.
Functionally, the ice bucket sits between the ice-making module and the user-accessible dispenser or interior compartment and directly interacts with the ice maker harvest mechanism, the auger/dispenser motor (if the unit dispenses ice), and any associated full-bin sensors or switches.Proper fit and alignment are necessary too ensure reliable harvest cycles, unobstructed ice flow to the dispenser chute, and correct operation of optical or mechanical sensors; misalignment, cracks, or deformation can cause jams, false full/empty indications, or interrupted dispensing. The bucket’s material and geometry also influence thermal behavior, condensation management, and how ice bridges form under load, which can be relevant when diagnosing intermittent service issues.
In this article readers will find a technical overview of the bucket’s function, guidance on model compatibility and identification (including OEM part-number considerations), common failure symptoms to watch for, diagnostic checks and basic troubleshooting steps, and practical replacement considerations such as necessary clearances, mounting points, and safety precautions during service. The goal is to give technicians, engineers, and appliance owners the context needed to assess whether the 241734001 ice bucket is the source of a problem and how to evaluate and install a correct replacement without prescriptive step-by-step instructions.
Table of Contents
- Function and Role of the Ice Bucket in Frigidaire Refrigeration Systems
- How the 241734001 Frigidaire Refrigerator Ice Bucket Integrates with Ice-Making and Dispensing Mechanisms
- Common Failure Symptoms and Diagnostic Indicators for the Ice Bucket Assembly
- Replacement Considerations, Model Compatibility, and Installation Procedure for the 241734001 Frigidaire Refrigerator Ice Bucket
- Q&A
- To Conclude
Function and Role of the Ice Bucket in Frigidaire Refrigeration Systems
The 241734001 Frigidaire Refrigerator Ice bucket is the molded receptacle that receives ice from the refrigerator’s ice maker and provides a controlled storage volume for harvested ice. It functions as a passive mechanical interface: mounting tabs and rails locate and secure the bucket in the freezer cavity, a notched lip or engagement slot aligns with the ice maker ejector or dispenser auger, and cutouts permit sensor arms or switches to detect bucket position and fullness. The component is manufactured for dimensional stability at subzero temperatures so that clearances between the bucket, auger, and ejector remain within tolerance and do not impede ice movement.
The bucket’s behavior directly affects ice delivery and harvest cycle control; common failure modes include broken mounting tabs, shell cracks that allow ice spillage, and frost bridging that binds ice into a mass and prevents proper auger rotation or ejection. Technicians and appliance owners should verify that the bucket seats fully on its rails, that sensor switches are not obstructed by ice or debris, and that the bucket geometry matches the freezer cavity and dispenser mechanism. replacing a damaged bucket restores required alignments and clearances and should be done with the correct replacement part to avoid recurring mechanical interference or sensor misreads.
- Key functional elements: mounting tabs/rails, ejector/auger interface, sensor cutouts.
- typical materials and properties: low-temperature thermoplastic designed for dimensional stability.
- Common symptoms of failure: dispenser jams, continuous harvest cycles, ice spillage, or non-engagement of auger.
- Service actions: inspect tabs and notches, remove frost bridging by thawing, verify sensor and auger clearance, replace if deformed or cracked.
| Item | Description |
|---|---|
| Material | Low-temperature-resistant thermoplastic designed to resist cracking and maintain shape in freezer conditions. |
| Primary function | Collect and store ice; provide mechanical interface with ice maker ejector and dispenser auger or sensor switches. |
| common failure modes | Broken tabs, shell cracks, frost bridging, and deformation that prevent proper seating or auger engagement. |
| Service tip | Confirm full seating and unobstructed sensor/auger interfaces; thaw and clean before replacement to verify whether deformation is permanent. |
how the 241734001 Frigidaire Refrigerator Ice Bucket Integrates with Ice-Making and Dispensing Mechanisms
the 241734001 Frigidaire Refrigerator Ice Bucket serves as the mechanical reservoir and guide between the ice maker’s output and the refrigerator’s dispensing mechanism. Its molded geometry includes a central splined hub that engages the auger drive or agitator, precision mounting rails that locate the bin under the ice maker outlet, and cutouts or recesses for the door-actuated switches or optical sensors used to detect ice presence. Internally, the bucket’s ribbing and slope control how cubes shift toward the auger or discharge chute, while dimensional tolerances on the hub and rail features determine whether torque from the dispenser motor transmits cleanly without binding or side loads that cause premature wear.
- Center hub engagement with auger or agitator
- Mounting rails and alignment tabs for correct placement
- Sensor cutouts and actuator surfaces for dispenser detection
- Internal ribbing and slope to reduce ice bridging and jamming
| item | Description |
|---|---|
| Material | Thermoplastic (polypropylene or similar) chosen for low-temperature toughness |
| Mechanical interface | Splined hub and locating rails that mate with specific Frigidaire ice maker families |
| Capacity & behavior | Acts as a passive reservoir; geometry encourages flow into auger-driven or gravity chutes |
Compatibility is resolute by the bucket’s mounting footprint and hub design: buckets with the same rail spacing and hub spline will integrate with a given family of Frigidaire ice makers and dispensers, while mismatched geometry can produce symptoms such as dispenser motor stalls, ice jams, or repeated “empty” sensor readings. For field service,check the center hub engagement for wear or cracking,confirm that sensor actuators and alignment tabs engage cleanly when the door is closed,and examine the bucket for deformation that can alter slope and promote bridging; replacing the bucket with the OEM 241734001 part restores designed clearances and often resolves mechanical feeding issues without further modification.
Common Failure Symptoms and Diagnostic Indicators for the Ice Bucket Assembly
The 241734001 Frigidaire Refrigerator Ice Bucket is the molded receptacle that collects and stages ice from the ice maker and provides the mechanical interface to the dispenser or door housing. In service terms this part establishes the critical clearances for the ice maker fill cup, the trip lever or detector, and (on dispenser-equipped models) the auger or rotor that advances ice to the chute. Compatibility is geometric as well as functional: correct tab locations, pivot points and interior volume are necessary to avoid ice bridging, false trip signals or interference with the auger drive. When replacing the bucket, confirm the refrigerator model and parts listing so the replacement matches those mounting and sensor engagement features rather than assuming worldwide interchangeability.
- visible cracks, fractured mounting tabs, or deformed lip that allow misalignment with the ice-maker or auger.
- Ice jamming or bridging inside the bucket causing intermittent dispensing or noisy auger operation.
- Incomplete or no ice delivery despite auger motor operation, suggesting clearance or trip-lever mis-engagement.
- Excessive frost or water pooling in the bucket area indicating airflow disruption or a seal/mounting failure.
diagnosing bucket-related faults begins with a visual and manual inspection: remove the bucket,check mounting tabs and pivot geometry for wear,and rotate the auger by hand to confirm there is no rubbing against the bucket wall. Electrical checks include verifying continuity of the dispenser/actuator microswitch and observing auger motor current draw – a high current with no ice output can indicate mechanical obstruction inside the bucket, while normal current with no delivery points to misalignment. For practical examples, if the auger spins freely with loose ice but nothing dispenses, measure the gap between the auger tip and bucket lip and compare to service specifications; if the bucket lip is cracked or warped, replacement with the correct part restores the designed clearance and usually resolves the symptom.
Replacement Considerations, Model Compatibility, and Installation Procedure for the 241734001 Frigidaire Refrigerator Ice Bucket
The 241734001 Frigidaire Refrigerator Ice Bucket functions as the receiving and staging container for ice produced by the ice maker and, depending on the appliance model, engages with the dispenser or auger mechanism. Technically, the bin’s critical features are its mounting tabs, guide rails, and any actuator cutouts or sensor windows that ensure correct positioning relative to the ice-maker ejection path and the dispenser motor.Before ordering a replacement, compare the physical mounting geometry (rail spacing, tab thickness, and sensor aperture location) and confirm that the bin’s interior profile matches the ice maker’s output chute; mismatches can prevent the motor from fully seating or cause ice bridging and dispenser jams.
- Pre-install checks: verify cabinet model number, inspect mounting tabs for cracks, and confirm sensor switch alignment.
- Removal steps: remove shelf/tray, depress retaining tabs, and slide bin free along its rails.
- Installation steps: align rails and any actuator tabs, slide bin fully until an audible click, then restore shelf and test dispensing cycles.
- Troubleshooting: if the bin binds, check for ice buildup or warped rails; briefly thawing or cleaning rails often restores correct operation.
| Item | Description |
|---|---|
| Material | Rigid molded plastic with molded guide features and reinforcement ribs |
| Mounting | Snap-in tabs and sliding rails; requires precise tab spacing and sensor cutout alignment |
| Common symptoms | Ice bridging, dispenser non-engagement, bin not seating, or noisy operation due to cracked tabs or misalignment |
During installation, support the ice maker assembly and avoid exerting lateral force on the rails; align the bin so that actuator tabs engage the ice-maker lever and any sensor windows align with the switch housing. After seating the bin, run a manual dispense cycle to verify the auger or dispenser motor can turn freely and that the bin clears the chute; if the motor stalls, remove the bin and inspect for obstructions or broken mounting features. Use a small amount of food-grade silicone lubricant on plastic rails if binding persists, and do not overtighten screws on any retaining brackets to avoid deforming the bin or altering rail geometry.
Q&A
What is Frigidaire part 241734001?
Part 241734001 is the replacement ice bucket (ice storage bin) designed for certain Frigidaire/Frigidaire gallery refrigerators. It is the plastic container that catches and stores ice produced by the refrigerator’s ice maker and usually includes the openings/mounting points to interface with the ice maker/auger assembly.
How do I know if 241734001 is compatible with my refrigerator model?
Compatibility should be verified by matching your refrigerator’s full model number (found on the appliance tag inside the fridge/freezer or on the door jamb) to the part listing. Use Frigidaire’s official parts lookup or a reputable appliance parts supplier to confirm compatibility. Do not rely only on fridge brand or appearance-model-level verification prevents ordering the wrong fit.
How do I remove the old ice bucket and install part 241734001?
Removal and installation are usually simple: open the freezer shelf or door that covers the ice area, lift the ice bucket slightly to disengage any locating tabs, then pull it straight out. Some models require rotating the bucket or disconnecting it from an auger/drive stub-no tools are often necessary. To install, position the new bucket into the same slots, engage tabs or the auger drive, and lower/rotate it into place. Because designs vary, follow your refrigerator’s service manual or the part supplier’s instructions for your exact model.
What are common signs that the ice bucket (241734001) needs to be replaced?
Signs include visible cracks or leaks, a broken or worn mounting tab that prevents the bucket from seating properly, a damaged auger interface that prevents dispensing, or persistent ice jamming inside the bin. If the bucket is discolored or warped and interferes with the ice maker’s operation, replacement is advisable.
Is the 241734001 ice bucket dishwasher-safe and how should I clean it?
Many refrigerator ice buckets are made of hard plastic and can be hand-washed with warm water and mild detergent. Some are top-rack dishwasher-safe, but you should check the refrigerator manual or part notes before using a dishwasher. Avoid harsh chemicals, abrasive pads, or very hot water that can warp plastic. Rinse and dry thoroughly before reinstalling to avoid freezer odor or ice clumping.
Will replacing the ice bucket fix dispensing or ice production problems?
Replacing a damaged bucket can fix mechanical issues related to seating, auger engagement, and ice jams. however, it will not fix electrical or ice maker module problems (faulty motor, fill valve, sensor, or control board). Diagnose whether the issue is purely mechanical (cracked bin, broken tabs) before replacing the bucket; if the ice maker assembly or dispenser motor is at fault, additional parts or repairs will be required.
Where can I buy OEM part 241734001 and what should I watch for?
You can purchase OEM 241734001 from Frigidaire authorized parts dealers, the Frigidaire parts website, or reputable appliance parts retailers. When buying, confirm the part number and model compatibility, check return policies/warranty, and be cautious of aftermarket copies that may differ in fit or material quality. keep proof of purchase for warranty or return purposes.
How arduous and how long does it take to replace the ice bucket, and do I need a technician?
Replacement is typically low difficulty and can often be done in 5-20 minutes with no tools by most owners. If the bucket is integrated with the ice maker or requires disconnecting electrical connections or the auger motor, or if you are unsure of the correct procedure, a qualified appliance technician is recommended to avoid damage or voiding warranty. Always unplug or power off the appliance before performing repairs if accessing electrical components.
To Conclude
The 241734001 Frigidaire refrigerator ice bucket is a small but essential component that supports reliable ice storage, organization and dispensing within compatible refrigerator models. By maintaining the correct fit, alignment and condition of the ice bucket, users help ensure consistent ice availability, reduce the risk of contamination or spillage and support the overall performance of the ice-making and dispensing system.
Accurate diagnosis is critically important before deciding on replacement: many symptoms that appear to be ice bucket related can rather stem from alignment issues, mounting hardware, or the ice maker and dispenser mechanisms. When inspection confirms that the 241734001 ice bucket is cracked, excessively worn, or otherwise compromised, timely replacement with the appropriate part helps restore proper function and avoids further wear to adjacent components.
the 241734001 ice bucket plays a practical role in everyday refrigerator operation,and a measured approach-combining careful troubleshooting with correct replacement when necessary-supports reliable ice service and prolongs the lifespan of the appliance. Routine checks and adherence to manufacturer guidance help ensure safe, effective results.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
