240338001 frigidaire Refrigerator Gallon Door Bin is a molded door shelf component designed to hold large containers-typically gallon jugs-in the inner face of a refrigerator door. It is indeed a non-electrical, structural accessory commonly fabricated from reinforced thermoplastic and engineered to clip or screw into the door liner; as a replaceable OEM part it serves as one element of the refrigerator’s user-accessible storage system.
Within the appliance the gallon door bin functions as a load-bearing retention element that interfaces mechanically with the door liner, mounting clips or screws, and the door’s gasketed closure system.While it does not interact directly with the refrigeration circuit or electrical controls, its attachment integrity and load distribution can influence door sealing, hinge loading, and user operation; broken or displaced bins can cause items to shift and may prevent full door closure or introduce unwanted door stress that accelerates wear on hinges and seals.
In this article readers will find a technical overview of the part’s function,guidance on determining compatibility with specific door liners and models,common failure symptoms (such as cracked plastic,broken mounting tabs,sagging or loose fit,and interference with door closure),practical troubleshooting steps for inspection and load testing,and considerations for replacement such as verifying part number,matching mounting geometry,material differences,and safe handling procedures during removal and installation.
Table of Contents
- Function and Role of the Gallon Door Bin within the Refrigerator Door Assembly
- How the 240338001 Frigidaire Refrigerator Gallon Door Bin Operates and Interfaces with Door Shelving, Gaskets, and Load Paths
- Common Failure Symptoms: Structural Damage, Mounting Wear, and Thermal Seal Compromise
- Replacement Considerations and Installation Procedures for the gallon Door Bin: Alignment, Fastening, and Part Verification
- Q&A
- The Conclusion
Function and Role of the Gallon Door Bin within the Refrigerator Door Assembly
The 240338001 Frigidaire Refrigerator Gallon Door Bin functions as an integrated storage component designed to hold large containers such as milk jugs and gallon-size bottles while maintaining secure positioning during door operation.Mounted to the inner door liner via molded engagement points, the bin transfers load into the door’s reinforced ribs rather than relying solely on adhesive or fasteners; this preserves door balance and reduces torque on the hinge assembly. The bin’s geometry and lip height are engineered to prevent containers from shifting when the door is opened or closed, and its location within the door assembly helps maintain organized airflow patterns inside the fresh food compartment by minimizing obstruction of return air paths.
From a technical and service viewpoint, the 240338001 bin behaves as a replaceable subassembly: compatibility depends on the door liner’s clip pattern, shelf rail spacing, and clearance to the door gasket rather than on cosmetic finish alone. Technicians should inspect the mounting tabs for wear or fracture and verify that the bin seats flush without forcing, as misalignment can cause noise, accelerated wear, or interference with the gasket. Practical examples include replacing a cracked bin after impact or swapping bins between doors only when the clip spacing and the notch pattern match; if clips differ, retrofit may require a different part or an adapter rail.
- Capacity: accommodates standard gallon containers and similarly sized items.
- Material: typically molded polypropylene or ABS for impact resistance and low-temperature performance.
- Mounting: engages via molded tabs/clips into door liner rails; no separate fasteners in most designs.
- common failure modes: tab fracture, stress cracking around screw bosses, and deformation from overloading.
| Item | Description |
|---|---|
| Part | 240338001 Frigidaire Refrigerator Gallon Door Bin |
| Typical material | Molded polypropylene or ABS for durability at refrigerated temperatures |
| Mounting interface | Molded engagement tabs that seat into door liner rail notches |
| Service checks | Verify tab integrity, seating alignment, and clearance to door gasket and adjacent shelves |
How the 240338001 Frigidaire Refrigerator Gallon Door Bin Operates and Interfaces with Door Shelving, Gaskets, and Load Paths
The 240338001 Frigidaire refrigerator Gallon Door Bin is a molded thermoplastic storage component that mechanically interfaces with the refrigerator door through a set of molded retention tabs and support bosses that snap into corresponding slots or rails in the door liner. When installed, the bin’s loading surface and front lip transmit vertical and shear forces into the door via these bosses; the design directs most of the weight into reinforced ribbing and the door frame rather than the thin face of the bin. Removal is typically a two-stage disengagement of retention tabs – one edge is lifted to free the rear bosses and then the front is pivoted out – so technicians should support the load during service to avoid overstressing the plastic during disassembly.
The bin does not form part of the primary door seal, but improper seating can interfere with the door gasket by creating a localized gap or deforming the gasket bead; the gasket bears against the door frame, so any bin-induced door tilt or liner deformation will compromise seal integrity and cooling performance.Plastic creep and thermal cycling can loosen the snap-fit over time; common symptoms include bin sag, cracking at the mounting bosses, or visible gasket gaps when the door is closed. For practical use, store heavy 1-gallon containers in the lowest compatible bin and avoid lateral stacking; if replacing the part, confirm the 240338001 matches the door liner’s slot pattern and support geometry to restore correct load paths and gasket clearance.
- Mounting type: Snap-in retention tabs and support bosses that transfer load to the door frame.
- Recommended practice: Place heaviest items in lower bins, support bin during removal.
- common failure modes: Crack at boss, bin sag, gasket gap from misalignment.
- Compatibility check: Match slot pattern and rib orientation to ensure proper load transfer.
| Item | Description |
|---|---|
| Material | Molded thermoplastic with reinforced ribs for localized load support |
| Primary interfaces | Retention tabs/bosses to door liner; clearance to door gasket (non-sealing) |
| Service note | Support load during removal; inspect bosses and gasket alignment after replacement |
Common Failure Symptoms: Structural Damage, Mounting Wear, and Thermal Seal compromise
The 240338001 Frigidaire Refrigerator Gallon Door Bin is an injection-molded storage component that supports large containers on the refrigerator door and connects to the door liner via molded hooks or rails. Typical failure modes begin at the load-bearing features: the molded hooks, snap-fit tabs, and the lip that retains the container. Repeated loading with oversized or shifting items, impact from slamming the door, and long-term exposure to cold cycles can produce hairline cracks, dimensional creep, or brittle fractures that reduce the bin’s effective load capacity and interfere with normal mating to the door. compatibility with specific frigidaire door geometries matters as even slight deformation can prevent proper engagement with the door liner and cause misalignment.
Structural damage and wear manifest in ways that affect both user function and refrigerator performance. Common indicators are visible cracks or deformation, a bin that sags or detaches when loaded, and wear or rounding of the mounting tabs that allow the bin to disengage under lateral loads. Thermal-seal compromise occurs when a warped or dislodged bin creates a gap at the door interface, producing localized frost, increased compressor runtime, or condensation on the door interior. Technicians can reproduce symptoms by loading the bin with its rated weight and observing for movement during door cycles, inspecting mounting hooks for material loss, and checking for frost or air infiltration around the door seal.
- Visible cracks or fractured corners that reduce load-bearing capacity
- Worn or rounded mounting tabs causing intermittent disengagement
- Sagging or rubbing against the door gasket leading to frost or condensation
- Audible rattling during door motion indicating loose retention
| Item | Description |
|---|---|
| Cracked shell | Loss of structural integrity; reduced safe load and potential leakage of spilled fluids into door cavity |
| broken mounting tab | Bin detaches or shifts; requires replacement or tab repair to restore secure engagement |
| Warped bin / seal gap | Interference with door gasket, localized frost buildup, and higher energy use from air leakage |
Replacement Considerations and Installation Procedures for the Gallon Door Bin: Alignment, Fastening, and Part Verification
The 240338001 Frigidaire Refrigerator Gallon Door Bin is a molded storage bin engineered to support the weight and lateral forces of a one‑gallon container while engaging the refrigerator door’s upper and lower mounting rails.Its function is primarily mechanical: the bin transfers container load into the door frame through molded hooks and a retaining lip. Over time these hooks and the lip can wear or crack, changing how the bin sits in the rail and producing symptoms such as sagging, noise during door movement, or incomplete door closure. Compatibility depends on the door rail geometry and mounting style (snap‑in vs. screw‑retained), so technicians should compare mounting tab locations and the printed part number to the door assembly before installation to avoid a mismatched fit that can allow excessive movement or stress concentrations on the door panel.
Installation requires careful alignment of the bin’s upper lip with the door’s upper rail, followed by rotating the lower edge into position until the molded hooks fully engage; apply steady, even pressure rather than levering to avoid fracturing the hooks. Before seating the new bin, clean the rail grooves and inspect screw clips or plastic retainers for damage; if retainers are deformed, replace them with the correct hardware rather than forcing a tight fit. After installation, verify the part number stamped on the bin and perform a functional check by closing the door and loading the bin with a typical weight to confirm there is no binding or excessive deflection. If the bin does not click into place or shows asymmetric gaps, remove it and re‑inspect the rail alignment and tab geometry rather than relying on adhesives or retrofit shims.
- Remove contents and lift the existing bin out by disengaging the top lip, then pull straight out to avoid bending hooks.
- Inspect rails, clips, and mating surfaces for cracks, debris, or missing fasteners; replace damaged clips first.
- Seat the top lip into the upper rail, pivot down until the lower hooks engage and an audible click is heard.
- Confirm door closes freely and perform a load test with a filled container to verify secure engagement.
| Item | Description |
|---|---|
| Material | Molded ABS plastic designed for impact resistance and dimensional stability |
| Mounting | upper lip and lower molded hook engagement with door rail (snap‑in); some models use supplemental clips |
| Common failure points | Cracked or worn hooks, deformed lip, or damaged rail clips causing sagging or loose fit |
| Compatibility note | designed for specific Frigidaire door assemblies; confirm model number and printed part code before replacement |
Q&A
What is part 240338001 for a Frigidaire refrigerator?
240338001 is an OEM refrigerator door bin (often called a gallon door bin) designed to hold taller items such as one‑gallon jugs in compatible Frigidaire/Frigidaire Gallery/Frigidaire Professional refrigerators. It is indeed a direct replacement plastic shelf that mounts to the interior door liner at the designated shelf location.
How can I confirm this part will fit my refrigerator model?
Locate your refrigerator model number (usually on a sticker inside the fresh food compartment, on the ceiling, or behind a crisper drawer).Use that model number to look up parts on Frigidaire’s parts site or on trusted parts retailers (AppliancePartsPros, PartSelect, RepairClinic). Enter the model number and confirm that 240338001 is listed as a compatible door bin for your specific refrigerator door configuration.
How do I remove the old door bin and install the 240338001 replacement?
General steps: remove all items from the bin, support nearby bins if needed, then either lift the bin up slightly to clear the bottom retention tabs and pull it forward, or squeeze the retention tabs inward and pull out depending on your door design. To install the new bin,align the top hooks or tabs with the door liner slots,engage the top,then rotate or push the bottom until it snaps into place. Do not force the part; if it does not seat easily, recheck alignment so you don’t break the plastic tabs.
Will the 240338001 gallon door bin hold a 1‑gallon jug? What is its capacity/dimensions?
This bin is designed to accommodate one‑gallon jugs and other tall containers typically used on refrigerator doors. Exact external dimensions can vary slightly between production runs and models; if you need precise measurements, measure your existing bin or check the seller’s spec sheet before purchasing. if the original bin held a gallon jug, the OEM replacement will be sized the same.
Is 240338001 an OEM part, and are there color or finish options?
240338001 is sold as an OEM Frigidaire replacement part. OEM bins are commonly available in translucent/clear or in colors matching the door interior (white/gray) depending on the refrigerator model. Availability of a specific color or finish depends on the retailer and the original appliance trim-confirm the color option when ordering.
Can I clean this bin in the dishwasher or with harsh chemicals?
Clean the bin with warm water, mild dish soap, and a soft cloth or sponge. Avoid abrasive pads, strong solvents (acetone, oven cleaners), or very hot water that could warp the plastic. While some plastic bins may tolerate the top rack of a dishwasher, repeated dishwasher exposure can cause clouding or warping-hand washing is the safest method.
my new bin doesn’t stay in place or the mounting tabs are broken – what should I do?
If the bin won’t stay seated, first verify correct alignment with the door slots. If mounting tabs on the bin or the molded brackets on the door liner are cracked or broken, the bin will not secure properly. Small tab damage sometimes can be temporarily repaired with a strong plastic epoxy, but the long‑term fix is replacement of the broken part (replacement bin or, if the door liner bracket is damaged, the door liner or bracket assembly). Check parts diagrams for your model to identify the correct repair part numbers and consider contacting an appliance technician for door liner repairs.
The Conclusion
the 240338001 Frigidaire Refrigerator Gallon Door Bin serves as a functional storage component designed to hold larger containers and organize items on the refrigerator door.As part of the door shelving system, it helps maximize usable interior space, maintain orderly access to frequently used items, and contribute to overall appliance usability. Properly fitting and intact door bins also help prevent spills,reduce shifting of stored goods during normal use,and protect both the contents and other interior components from damage.
Timely and accurate diagnosis of wear, damage, or fit issues with the 240338001 frigidaire Refrigerator Gallon Door Bin is crucial to preserve refrigerator performance and user safety. Signs such as visible cracks, broken mounting tabs, looseness, or difficulty securing larger containers indicate the bin may no longer function as intended. Replacing a compromised bin with the correct model restores intended storage capacity and stability, minimizes risk of further damage to the door or stored items, and supports continued efficient use of the appliance.
When replacement is warranted, selecting the properly specified part and following appropriate installation practices ensures compatibility and reliable operation. If uncertainty exists about diagnosis or repair, consulting the appliance manual or a qualified service technician is a prudent step to confirm the issue and complete replacement safely. Maintaining functional door bins like the 240338001 contributes to the appliance’s longevity and to a safer, more convenient refrigerator experience.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
