316272000 frigidaire Igniter and Orifice Holder is a combined ignition and gas metering mounting component used on frigidaire gas ranges and ovens; it consists of a bracket or holder that secures the gas orifice in the burner assembly and positions the igniter element relative to the orifice and burner ports. As a physical and functional interface between the gas manifold and the ignition system, the assembly ensures consistent alignment, sealing, and spacing required for reliable ignition and repeatable combustion.
Inside the appliance, the igniter and orifice holder interfaces with the gas supply manifold, the burner head, the igniter element (either spark or hot surface type), and the appliance control and safety systems (gas valve and flame-sensing circuitry). Proper placement provided by the holder governs the air-fuel mixing at the burner ports, the timing and location of ignition, and the flame pattern; incorrect alignment, a clogged orifice, or a failed igniter can cause delayed ignition, incomplete combustion, weak or unstable flames, or safety shutdowns initiated by the control system.
In this article readers will find a technical review of the component’s function and typical installation locations,guidance on model and part-number compatibility,a list of common failure symptoms to watch for,and diagnostic approaches suitable for technicians and engineers (visual inspection,electrical checks,and gas-flow considerations). The article will also cover practical troubleshooting steps and replacement considerations-such as verifying OEM fitment, sealing and mounting requirements, safety precautions (isolating gas and power), and factors that affect reliable reassembly-so appliance owners and service professionals can assess whether repair or replacement is required and how to proceed safely and effectively.
Table of Contents
- Function and Role of the Igniter and Orifice Holder in gas Burner Operation
- How the 316272000 Frigidaire Igniter and Orifice Holder Works Inside the Appliance
- Common Failure Modes and Diagnostic Symptoms of the Igniter and Orifice Holder
- Replacement Considerations and Installation Procedure for the Igniter and Orifice Holder
- Q&A
- To Conclude
Function and Role of the Igniter and Orifice Holder in Gas Burner Operation
the 316272000 frigidaire Igniter and Orifice Holder is an integrated service component that both positions the gas orifice and supports the ignition electrode so that a controlled spark can reliably light the burner. In typical gas range operation, the electrode receives pulses from the range’s ignition module and produces a spark at the precise location where gas issues from the orifice; the orifice holder fixes the orifice geometry and maintains the gap and alignment needed for consistent flame characteristics. Technicians encountering intermittent ignition, prolonged clicking, or an unstable (lifting or yellow) flame should inspect this assembly for misalignment, carbon fouling, cracked ceramic insulation, or a loose mounting that can change the electrode-to-orifice relationship.
Functionally, the orifice holder dictates gas flow characteristics by securing the jet and providing a repeatable port size, while the igniter converts electrical energy into a localized ignition source; both items must be mechanically and electrically compatible with the appliance’s burner and control system. Practical service checks include verifying secure mechanical mounting, clean orifice ports, intact insulation on the electrode, and tight electrical connections; replacing the assembly with the correct part number preserves orifice sizing and electrode position, which avoids changes in mixture or flame shape. Common diagnostic indicators and component attributes are summarized below to assist repair planning and parts verification.
- Primary functions: secure orifice sizing, precise electrode alignment, and stable ignition initiation.
- Common faults: clogged orifice,cracked ceramic,loose bracket,corrosion on terminals,and misalignment.
- Service actions: visual inspection, cleaning of carbon deposits, verify electrical connection and continuity, replace with matching part number when geometry is altered.
| Item | Description |
|---|---|
| Igniter (electrode) | Produces ignition spark; requires intact insulation and correct gap to the orifice. |
| Orifice holder | Secures and positions the gas jet to maintain consistent flow and flame shape. |
| Diagnostic signs | Clicking/failed ignition,delayed light,weak or yellow flame,visible deposits or damage. |
How the 316272000 Frigidaire Igniter and Orifice Holder Works Inside the Appliance
The 316272000 Frigidaire Igniter and Orifice Holder is a combined assembly that positions the gas orifice directly beneath the burner and provides the ignition source needed to light the gas.In many Frigidaire gas cooktops and ovens this assembly uses a hot-surface igniter or a pilot-style electrode depending on the model; the holder secures the orifice so the gas jet aligns with the ignition source and the burner ports. Mechanically it provides the mounting interface and the correct standoff distance for reliable ignition, while electrically it must match the appliance connector and ratings. Technicians should verify the connector type, mounting holes, and orifice thread or push-fit style to confirm compatibility before replacement or repair.
During normal operation the igniter element heats or sparks as the control calls for gas, and the fixed orifice meters the flow to produce a stable flame pattern; any change in orifice position, clogging, or a weakened igniter alters flame size, color, and ignition delay. Typical failure modes include cracked igniter elements, carbon or debris blocking the orifice, or a misaligned holder that causes intermittent lighting or a yellow/sooty flame. For diagnosis and safe servicing, check continuity and resistance of the igniter with a multimeter, visually inspect the orifice for deposits, and confirm correct seating of the holder to restore repeatable ignition performance.
- Common symptoms: delayed ignition, weak or uneven flame, continuous clicking, or failure to light.
- Fast checks: continuity and resistance measurement, visual orifice inspection, and verification of proper mechanical alignment.
- When replacing: match electrical connector, mounting pattern, and orifice specification to the appliance model.
| Item | Description |
|---|---|
| Function | Positions the gas orifice and provides the ignition source for reliable burner lighting. |
| Typical failure symptom | Delayed or no ignition,weak flame,or yellow soot-producing combustion. |
| Common inspection | Measure igniter resistance, check for physical cracks or deposits, verify holder alignment and secure mounting. |
Common Failure Modes and Diagnostic Symptoms of the Igniter and Orifice Holder
The 316272000 Frigidaire Igniter and Orifice Holder combines the ignition element and the gas orifice mounting into a single serviceable assembly so that the electrode,insulating ceramic,and orifice remain precisely aligned relative to the burner.The igniter produces the high-temperature glow (or spark in some designs) necesary to ignite the gas delivered through the orifice, while the holder secures the orifice and maintains the correct jet geometry. Typical mechanical failure modes are cracked or chipped ceramic, bent or shifted orifice seating, and orifice contamination from carbon or debris; electrical failure modes include open or high-resistance igniters, broken wiring or connector faults, and thermal-fracture of the electrode after repeated heat cycles.
- Continuous clicking without ignition-often a grounding or electrode gap/position issue.
- No spark or visible glow at the igniter despite correct voltage applied.
- delayed ignition or audible gas “pop” when the burner finally lights.
- Weak, lifting, or yellow-tipped flame indicating restricted flow or wrong orifice alignment.
- Intermittent operation that correlates with stove cooling or vibration-suggests a fractured element or loose connector.
- Gas odor during ignition attempts-indicates significant delay or persistent valve leak and requires immediate attention.
Diagnosing failures combines visual checks, electrical measurement, and flame observation: inspect the ceramic for hairline cracks, test igniter continuity and resistance (an open reading indicates a failed element), confirm clean and correctly sized orifice ports, and verify secure mechanical mounting and wiring continuity under load. Practical fixes include cleaning or replacing a contaminated orifice, reseating or replacing the holder if alignment is off, and replacing the igniter when resistance is out of specification or when thermal damage is present; if symptoms include gas odor, repeated delayed ignition, or unstable flames, remove power and gas and consult a qualified technician.
| Item | Description |
|---|---|
| Igniter resistance | Typical cold-glow igniters measure in the low tens to low hundreds of ohms; an open circuit indicates a failed element. |
| Orifice obstruction | Partial blockage reduces flame size and causes delayed ignition or sooting; cleaning or replacement restores proper flow. |
Replacement Considerations and Installation Procedure for the Igniter and Orifice Holder
The 316272000 frigidaire Igniter and Orifice Holder combines the ignition electrode and the gas orifice into a single mounting assembly that locates the ignition source relative to the burner flame and controls the gas jet size. The igniter element provides the spark or hot-surface energy to initiate combustion while the orifice restricts gas flow to the required volumetric flow for the burner; correct orientation and seating of the holder ensure the electrode-to-orifice geometry produces stable ignition and consistent flame characteristics. Technicians should verify the part number against the appliance model before installation and inspect the ceramic insulator, electrode tip condition, and orifice orifice for debris or deformation – symptoms such as delayed ignition, intermittent sparking, or a yellow/unstable flame often indicate electrode misalignment, a clogged orifice, or degraded insulation rather than an unrelated control fault.
Replacement and installation require careful mechanical and leak-control practices: shut off gas and electrical power, maintain the original electrode gap and alignment (the electrode tip must be positioned within a small, consistent distance from the burner port), and avoid cross-threading or over-tightening the orifice holder which can damage threads or distort the orifice seating. After fitting the assembly and reconnecting the electrode led, perform a leak check at the union using a liquid or electronic detector and verify ignition behavior across low-to-high settings to confirm proper flame size and stability. If ignition remains weak after a correct installation,re-check wire continuity and grounding paths,and compare flame shape to a known-good burner to determine whether the issue is the orifice size,regulator pressure,or the igniter element itself.
- pre-install checks: confirm part number, inspect electrode insulator and orifice for obstruction, and verify mounting hardware condition.
- Installation steps: secure holder without overtightening, restore gas/electric supply, perform leak test, and validate ignition performance.
- Diagnostic cues: intermittent spark → electrode or wiring; weak flame → incorrect orifice or pressure; continuous pilot → misalignment or grounding fault.
| Item | Description |
|---|---|
| Part | 316272000 Frigidaire Igniter and Orifice Holder – combined igniter electrode and orifice mounting assembly |
| Materials | Ceramic insulator for the electrode, brass orifice, metal holder/fasteners |
| Common replacement indicators | Intermittent ignition, visible electrode damage, clogged orifice, or gas leakage at the holder |
Q&A
What is the Frigidaire 316272000 igniter and orifice holder?
The 316272000 is an OEM replacement assembly used on many frigidaire gas ranges/ovens. It combines the gas orifice holder (the part that positions the gas orifice at the burner) with the ignition electrode/igniter used to light the burner. In short, it locates the orifice and provides the ignition function for a surface burner.
What symptoms indicate this part is failing or needs replacement?
Common symptoms include: the burner(s) will not light, you hear continuous clicking without ignition, weak or intermittent ignition, gas smell or delayed ignition, or visible physical damage/corrosion to the orifice or electrode. A clogged orifice can cause low flame, while a cracked or broken electrode or open circuit igniter will prevent sparking or heating.
How can I test the igniter/electrode portion safely?
Start by disconnecting power and gas.Visually inspect for cracks, severe corrosion or breaks. Use a multimeter: for a spark electrode you should have continuity (not an open circuit); for a hot-glow igniter (less common on cooktop parts) you can measure resistance and compare to the OEM specification or a new part. You can also check at start-up (with care) for presence of spark or for the igniter to glow-only perform live tests if you are experienced and take proper safety precautions (turn gas off quickly if no ignition). If unsure,have a qualified technician test live circuits.
How do I replace the 316272000 igniter and orifice holder?
General replacement steps: 1) Turn off the gas supply and unplug the appliance. 2) Remove grates and burner caps.3) Remove screws or retaining clips holding the orifice holder/igniter assembly. 4) Disconnect the igniter wiring harness. 5) Remove the old assembly and install the new one in the same orientation. 6) Reconnect wiring, secure the assembly (do not overtighten), replace burner cap and grates. 7) Restore gas and power, then test for proper ignition and perform a leak test at the orifice/nut with soapy water or gas leak detector. If you are not comfortable working on gas appliances, hire a qualified technician.
What tools and materials will I need to replace it?
You will typically need: screwdrivers or a nut driver set, an adjustable wrench or box wrench (for the orifice holder nut), pliers, a multimeter (for tests), a small brush or compressed air for cleaning, and soapy water or a gas leak detector for leak testing. Always use tools that match the fasteners to avoid damage and wear appropriate personal protective equipment.
How do I ensure the replacement part is compatible with my appliance?
Verify compatibility by checking your appliance’s model number (usually on a tag behind the oven door frame, broiler drawer, or range back panel). Cross-reference that model with the part number 316272000 in Frigidaire/Whirlpool parts diagrams or from an authorized parts distributor. Do not assume fitment by visual similarity-different years and submodels can use different orifice sizes or assemblies.
Should I use the OEM 316272000 part or an aftermarket equivalent?
OEM parts like 316272000 are recommended becuase they match factory specifications for orifice size, electrode placement, and mounting.Aftermarket parts can be acceptable if they explicitly list compatibility with your exact model and meet the same specifications. Because gas flow and ignition geometry are critical for safe, efficient combustion, choose quality parts and suppliers you trust.
After replacement, what checks should I perform to confirm the job is correct and safe?
after reassembly and restoring gas/power: 1) Turn a burner on and confirm reliable ignition and a stable blue flame. 2) check for any gas leaks around the orifice holder or fittings with soapy water or an electronic gas detector-bubbles or a rise in detector reading indicate a leak. 3) Verify no unusual odors, delayed ignition, or yellow/tall flames (which indicate combustion issues). If anything looks or smells wrong, shut off gas and power and contact a technician.
To Conclude
The 316272000 Frigidaire Igniter and Orifice Holder play a central role in the safe and efficient operation of gas cooking appliances. The igniter provides the reliable spark or glow required to initiate combustion, while the orifice holder positions and secures the gas orifice to ensure proper fuel metering and stable burner performance.Together these components help maintain consistent heat output, reduce the risk of delayed ignition or incomplete combustion, and contribute to overall appliance longevity and user safety.
Because wear, contamination, or damage to either part can cause performance issues, proper diagnosis and timely replacement are vital. Accurate troubleshooting-ideally performed by a qualified technician-ensures the root cause is identified and the correct replacement (such as the 316272000 Frigidaire Igniter and Orifice Holder) is installed, preserving safety and efficiency while avoiding unneeded expense. Routine inspection, adherence to manufacturer specifications, and professional service when needed will help maintain reliable operation and extend the service life of the appliance.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
