241860801 Frigidaire Refrigerator Ice Container Assembly is a molded ice storage and delivery component used in compatible Frigidaire refrigerator models; it is teh bin that collects, stores and presents ice produced by the ice maker and, where applicable, houses the auger or delivery mechanism used by the dispenser. As a mechanical storage subassembly, the ice container typically includes mounting features, a chute interface, and may incorporate a motor-driven auger, trap door or sensor mounting points depending on the refrigerator configuration.
Inside the appliance the ice container interfaces directly with the automatic ice maker, the water/ice dispenser system, and any associated actuators and sensors. It receives ice from the ice maker mold, provides a controlled storage volume to limit re-freezing and bridging, and aligns with the dispenser chute and auger motor to enable reliable delivery. The container’s fit, seals and alignment affect ice flow, sensor signaling (full/empty indicators) and the load on the auger motor; thermal transfer, drainage paths and clearance to the evaporator and door also influence ice quality and system behavior.
This article explains the ice container’s function and key design features, outlines model compatibility and typical mounting/connection points, and describes common failure symptoms such as jamming, nondispensing, excessive melting or sensor faults. It also covers diagnostic and troubleshooting considerations-visual inspection checkpoints, sensor and auger tests-and replacement factors technicians and owners shoudl evaluate, including part verification, fitment, and basic installation precautions to restore proper ice storage and dispenser operation.
Table of contents
- Function and Role of the Ice Container Assembly in Frigidaire Refrigeration Systems
- How the 241860801 Frigidaire Refrigerator Ice Container Assembly Works Inside the Appliance
- common Failure Symptoms and Diagnostic Indicators for the Ice Container Assembly
- Compatibility, Replacement Considerations, and Installation Procedures for the Ice Container Assembly
- Q&A
- In summary
Function and Role of the Ice Container Assembly in frigidaire Refrigeration Systems
241860801 Frigidaire Refrigerator Ice Container Assembly serves as the receptacle and mounting interface for the refrigerator’s icemaker and dispenser system. It collects ice produced by the icemaker and positions it for delivery through the auger or chute; its geometry, guide rails, and retaining tabs ensure the bin seats correctly so the auger drive and any door-actuated switches engage reliably. The bin also contributes to thermal behavior inside the freezer compartment by exposing ice surfaces to minimal airflow and by providing a barrier that limits warm-air infiltration when the dispenser or door is opened. Technicians should inspect the bin’s mounting features and sealing edges during service as improper seating or worn tabs commonly lead to dispensing jams or accelerated melting.
The component is molded from rigid food-grade plastic and is designed for removal for cleaning and replacement if damaged; cracks, warped rails, or deformed mounting hooks compromise both storage capacity and mechanical engagement with the icemaker/auger assembly. Typical operational issues related to the bin include ice bridging, increased frost accumulation on its exterior, and irregular dispenser torque caused by misalignment.Routine checks include verifying the bin seats flush against its stops, confirming the auger drive coupler engages without excessive wobble, and cleaning to remove compacted ice or scale. For example, if users report clumped, wet ice or repeated dispenser stalls, swapping in a known-good bin or confirming the part 241860801 fits the model’s guide geometry can quickly isolate whether the bin or the icemaker/auger is at fault.
- Symptoms of bin-related faults: dispenser jams, ice bridging, water leakage from cracks, abnormal frost patterns.
- Key inspection points: mounting tabs,guide rail wear,auger coupling alignment,cleanliness of bin interior.
- Maintenance actions: hand-wash with mild detergent, inspect for deformation, replace if structural damage is present.
| Item | Description |
|---|---|
| Function | Collects and positions ice for auger/dispenser engagement |
| Material | Rigid, food-grade plastic (molded bin) |
| Service checks | Mounting tab integrity, seating alignment, interior cleanliness |
How the 241860801 Frigidaire Refrigerator Ice Container Assembly Works Inside the Appliance
241860801 Frigidaire Refrigerator Ice Container Assembly functions as the receiving and delivery chamber between the ice maker’s ejector mechanism and the user-accessible dispenser or removable bin. The assembly is molded to align with the ice maker dump path, secure to specific mounting points, and provide a controlled feed area where ice cubes accumulate without obstructing the ejector. In models with a door dispenser the container also provides the interface for the auger or paddle drive; in manual-access configurations it simply retains cubes and guides them out of the bin. Technicians should confirm the part number and check tab locations, sensor cutouts, and chute orientation during replacement to ensure mechanical and electrical interfaces match the host refrigerator model.
The container’s behavior inside the appliance is largely mechanical: ice is pushed from the ice maker into the bin, gravity and the bin geometry control cube flow, and a rotating auger or a manual scoop extracts ice through a chute. Common operational issues arise from improper seating (which prevents the dispenser switch or drive from engaging), cracks or deformations that alter cube flow, and ice bridging from partial melts or frost accumulation that inhibits auger rotation. Practical service checks include verifying proper engagement of the dispenser motor with the auger coupling, inspecting mounting tabs and gaskets for wear, and clearing compacted ice with controlled defrosting rather than forceful prying to avoid damaging the container or adjacent components.
- Mounting tabs and alignment features: ensure correct mechanical fit and engagement with the dispenser drive.
- Chute and auger interface: designed to permit controlled delivery and prevent jamming under normal ice loads.
- Sensor and notch accommodations: some models rely on container position sensors or door interlocks for dispense operation.
| Item | Description |
|---|---|
| Material | rigid food-grade plastic molded for low-temperature durability and minimal water absorption. |
| Function | Receives ice from the ice maker, stores cubes, and interfaces with auger/paddle or provides manual access. |
| Compatibility Notes | Verify tab layout, chute orientation, and any sensor cutouts against the refrigerator model before ordering or installing. |
Common Failure Symptoms and Diagnostic Indicators for the Ice Container Assembly
the 241860801 Frigidaire Refrigerator Ice Container Assembly functions as the structural reservoir and mechanical interface between the ice maker/auger and the dispenser. It locates the ice relative to the auger drive spline, provides a controlled ice chute to the dispenser opening, and often carries mounting points for microswitches or sensors.When the container is out of specification-due to cracked walls, worn or stripped splines, distorted geometry from impact, or poor sealing-behavioral symptoms such as reduced capacity, ice bridging, or misaligned engagement with the auger will occur and can mimic electrical or motor faults even though the drive components are operational.
Technicians diagnose container-related failures by combining visual inspection, mechanical manipulation, and simple electrical checks: look for hairline cracks, plastic deformation at the spline interface, signs of ice compaction, and water intrusion patterns; manually rotate the auger coupling with the container removed to verify engagement; and monitor auger motor current and switch continuity to separate mechanical binding from electrical faults. Practical replacement criteria include visible spline wear, recurrent ice jams after defrost, persistent water pooling inside the bin, or fitment issues with the dispenser door that prevent consistent feed to the auger.
- No ice dispensed while auger motor runs – check for stripped drive spline or missing coupling engagement.
- Loud grinding or clunking during dispense – inspect for foreign debris, cracked container ribs, or damaged auger interface.
- Intermittent dispensing or false-full indications – test door/float switches for continuity and inspect sensor mounting points on the container.
- Water leaking into fresh-food compartment or pooling in container – examine container seals, drain passages, and for hairline cracks.
- Compacted or clumped ice – verify freezer temperature stability, container geometry for bridging, and ice maker output consistency.
| Item | Description |
|---|---|
| Striped/rounded spline | Auger slips under load; motor runs but ice is not delivered; replacement of the container (or coupling) required. |
| Cracked container wall | water leaks or ice falls out of proper path, causing jams or ice accumulation outside the auger channel. |
| Sensor/switch misalignment | Intermittent or false-full signals-confirm switch continuity and correct mounting position on the container. |
Compatibility, Replacement Considerations, and Installation procedures for the ice Container Assembly
The 241860801 Frigidaire Refrigerator Ice Container Assembly serves as the ice storage and delivery interface between the ice maker and the user-facing compartment or dispenser. It is engineered to collect harvested ice,present it to the dispenser mechanism,and provide mounting points for any bin-full sensors or agitator drives; differences in lip geometry,sensor tab location,and drive coupling orientation determine fit across model variants. In practice, this assembly must tolerate repeated thermal cycling and mechanical impacts from ice movement; cracked or warped containers can cause jamming, false bin-full signals, or misalignment with the dispenser drive. Technicians should confirm the OEM part number against the refrigerator model plate and inspect the sensor mount and coupling features rather than relying solely on external dimensions when assessing compatibility.
When replacing the ice container, remove any residual ice to avoid added weight, disengage the dispenser or auger drive according to the manufacturer’s service procedure, and inspect the mating surfaces for damage or frost buildup that could interfere with seating. After installing the new container, verify engagement of the bin switch and perform a manual ice-release cycle to confirm that the ice maker harvest and dispenser actuation operate without obstruction; also check that the container is fully seated and retained by its locking features. Practical replacement steps include:
- Power off or isolate the ice maker/dispenser motor and remove stored ice from the bin.
- Unclip or unscrew the retaining hardware, noting the orientation of any drive couplings or sensor tabs.
- Seat the replacement container,ensuring sensor tabs align and drive couplings engage without excessive force.
- restore power and run a single harvest/dispense cycle to confirm proper operation and absence of leaks or noise.
| Item | Description |
|---|---|
| Mounting interface | Notches and tabs that align to model-specific dispenser drives and bin-full sensors |
| Material | Cold-resistant thermoplastic designed to resist cracking and dimensional change at freezer temps |
Q&A
What is the 241860801 Frigidaire Refrigerator Ice Container Assembly?
The 241860801 is an OEM ice container assembly used in some Frigidaire refrigerators with built‑in ice dispensers. It typically includes the ice bin (container) and the internal features that hold and feed ice to the auger/dispenser. It is the part that collects ice from the ice maker and presents it to the dispenser/auger mechanism.
how do I know if I need to replace the 241860801 ice container assembly?
Replace the ice container assembly if the bin is cracked or warped and leaking ice, the ice won’t dispense because the bin won’t rotate or the auger cannot engage, or internal mounting points are broken so the auger/motor cannot seat correctly. Also replace it if persistent ice jamming/flow problems continue after confirming the ice maker and motor are working.
How can I confirm compatibility with my refrigerator before buying 241860801?
Verify compatibility by checking your refrigerator model number (usually on a sticker inside the fresh food compartment or freezer) and comparing it to the part listing on the Frigidaire parts website or a trusted parts supplier. You can also remove the old bin and confirm its part number (frequently enough printed on the part) and dimensions. When in doubt, contact Frigidaire customer support or an authorized parts dealer with your fridge model and the 241860801 part number.
What tools and safety steps are needed to install the 241860801 ice container assembly?
Common tools: Phillips screwdriver and possibly a nut driver or Torx driver depending on mounting screws. Safety steps: unplug or switch off power to the refrigerator (or turn off the breaker) before working near electrical components, empty and remove all ice from the bin, wear gloves to protect hands from cold and sharp edges, and keep the area dry to avoid slips. Installation usually involves removing a retaining screw or clip, sliding out the old bin, seating the new bin into its tracks, securing any screws/clips, and restoring power.
What are common causes of ice dispensing problems, and how do I determine if the ice container (241860801) is the problem?
Common causes include an overfilled or jammed bin, frozen/icy auger, broken auger motor coupling, cracked bin that lets ice fall out of alignment, or issues with the dispenser motor or switches. To determine if the bin is the problem: 1) Remove the bin and inspect for cracks, broken tabs, or obstructions. 2) Manually rotate the auger (with power off) to see if it moves freely.3) If the bin is intact and auger runs but ice doesn’t dispense, the issue is likely the motor/switch. If the bin is physically damaged or the auger cannot engage as of the bin shape, replace the bin (241860801).
How should I clean and maintain the 241860801 ice container assembly?
To clean: remove the ice and take out the bin, let any solid ice melt, wash the bin with warm water and mild soap (do not use harsh abrasives or solvents), rinse and dry thoroughly before reinstalling. Sanitize periodically by using a diluted vinegar solution or a manufacturer‑recommended cleaner. Avoid leaving stale ice in the bin for long periods and keep freezer temperature at the recommended setting (usually 0°F / -18°C) to reduce excessive clumping and ice bridging.
How long does it take to replace the ice container assembly and can I do it myself?
Replacement is usually straightforward and can often be completed in 15-45 minutes by a competent DIYer. Time depends on model-specific attachment methods. If you are comfortable removing the old bin, handling screws/clips, and restoring power safely, you can do it yourself. if the bin is integrated with electrical connectors or the auger motor, or if you are unsure, consider hiring a qualified appliance technician.
Where can I purchase the 241860801 part and what warranty should I expect?
You can buy the 241860801 from the Frigidaire parts website, authorized Frigidaire dealers, major appliance parts retailers, or reputable online parts marketplaces. OEM parts are preferred for fit and function. Warranty varies by seller and whether the part is new or refurbished; many authorized sellers offer a limited parts warranty (often 90 days to one year). Check the specific seller’s warranty and return policy before purchase.
In Summary
The 241860801 Frigidaire Refrigerator Ice Container Assembly plays a central role in the ice-making and dispensing system by collecting, protecting and delivering ice within compatible refrigerator models. Proper function of this component helps maintain ice quality, supports reliable dispensing, and prevents issues such as jams, contamination, or leaks that can affect user convenience and appliance performance.
Accurate diagnosis and timely replacement of the ice container assembly are critically important to restore normal operation when signs of wear, damage, or misalignment appear. Evaluating symptoms-such as irregular dispensing, visible cracks, water pooling, or unusual noises-helps determine whether repair or replacement is appropriate, and using compatible parts preserves fit, function and safety.
When maintenance or replacement is required, following manufacturer guidance or consulting qualified service professionals ensures the work is performed correctly and minimizes the risk of further problems.Regular inspection and attention to the condition of the 241860801 assembly support long-term reliability and hygienic ice handling in Frigidaire refrigerators.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
