DG96-00424A Samsung Assembly NOZZLE KIT;NX58K9850SS SLIDE IN FLE OEM
DG96-00424A Samsung Assembly NOZZLE KIT;NX58K9850SS SLIDE IN FLE OEM is an OEM nozzle assembly for Samsung slide-in cooking ranges, referenced for use with models such as the NX58K9850SS. the kit comprises one or more precision orifices and associated mounting hardware and seals designed to meter and direct the flow of gas or other working fluids within the appliance’s delivery system; components are typically machined from corrosion-resistant metals and paired with elastomeric gaskets to ensure a sealed interface with the burner manifold.
Inside the appliance the nozzle kit functions as the final metering and direction element between the manifold or regulator and the individual burners or injectors. It interacts directly with the gas valve, manifold, pressure regulator and ignition system, and its characteristics (orifice diameter, alignment and sealing) have a direct effect on flame shape, combustion efficiency and heat distribution.Proper installation and sealing are also integral to safety, since leaks or mis-sized orifices can produce incomplete combustion, soot, or unexpected flame behaviour that can trigger safety interlocks or sensors.
In this article readers will find a technical overview of the nozzle kit’s function and design, guidance on verifying compatibility with specific appliance models, common failure symptoms to watch for, step-by-step troubleshooting checks and testing procedures, and practical considerations for replacement and safe installation. Topics covered include how to recognize pressure- or flow-related failures (weak or uneven flame, yellowing, soot, gas odor), basic diagnostic steps (visual inspection, leak testing, manifold pressure checks), and replacement best practices (confirm OEM part numbers and conversion jet sizes, replace seals, follow gas shut-off and leak-test protocols, and when to engage a qualified service technician).
Table of Contents
- Function and Role of the Nozzle Kit in Slide‑In Range Operation and Seal Integrity
- How the DG96-00424A Samsung Assembly NOZZLE KIT;NX58K9850SS SLIDE IN FLE OEM Works Inside the Appliance
- Common Failure Symptoms and Diagnostic Indicators for Nozzle Kit malfunction
- replacement Considerations, Model Compatibility, and stepwise Installation Procedure for the DG96-00424A Nozzle Kit
- Q&A
- In Retrospect
Function and Role of the Nozzle Kit in Slide‑In Range Operation and Seal Integrity
The DG96-00424A Samsung Assembly NOZZLE KIT;NX58K9850SS SLIDE IN FLE OEM is a precision assembly that controls the delivery and distribution of fuel/air to the range’s combustion or heating elements while also providing the mechanical interface that preserves seal integrity between the cooktop and the internal cavity. The kit contains orifices and alignment features machined to OEM tolerances so flow rates and spray patterns remain within design limits; any erosion, blockage, or misalignment alters combustion characteristics, increases soot or odor risk, and can compromise the gasketed mating surfaces that prevent exhaust, steam, or grease from migrating into cabinetry or control compartments. Technicians should treat the nozzle kit as both a fluid-flow component and a structural sealing component when diagnosing uneven heat output, ignition instability, or evidence of leakage at the cooktop-to-frame joint.
Practical inspection and replacement decisions hinge on measurable symptoms and fit checks rather than cosmetic condition alone. Typical diagnostic signs include inconsistent flame shape or color, localized hot/cold spots during cooking cycles, persistent smell of fuel, or visible gaps at the cooktop flange after reassembly; cleaning may clear minor deposits but worn or distorted orifices or damaged alignments require replacement with the correct OEM kit to restore specification. For routine service, verify orifice size, mounting tab alignment, and gasket compression during bench testing; use the checklist below to prioritize actions and the reference table for quick identification of the kit’s role and compatible model.
- Features to inspect: orifice integrity, alignment tabs, mounting fasteners, gasket condition
- Symptoms prompting replacement: uneven heating, ignition failure, odor, visible leakage at seam
- Service tip: compare orifice numbering and mounting geometry to OEM drawing before installation
| Item | Description |
|---|---|
| Nozzle kit (DG96-00424A) | Precision orifices and mounting hardware that regulate fuel/air flow and form the seal interface for the slide-in range assembly |
| compatibility | Designed for NX58K9850SS slide-in ranges; verify model and production code to ensure proper fit |
How the DG96-00424A Samsung Assembly NOZZLE KIT;NX58K9850SS SLIDE IN FLE OEM Works Inside the Appliance
the DG96-00424A Samsung assembly NOZZLE KIT;NX58K9850SS SLIDE IN FLE OEM is an OEM replacement nozzle subassembly designed to locate and secure individual nozzle or injector elements within the appliance’s supply-to-burner/distribution path. The kit typically contains the nozzle housings, mounting tabs, alignment ribs and sealing surfaces that establish the required clearance and orientation for correct flow pattern and distribution. In practice this assembly is the mechanical interface that preserves factory geometry-maintaining consistent jet angles, spacing and seals-so that downstream components (burner heads, injectors or spray manifolds) perform to specification on compatible NX58K9850SS slide‑in units.
- Compatibility: matches OEM mounting points and clearances for the specified NX58K9850SS slide‑in family.
- Symptoms of failure: uneven flow, poor ignition/combustion behavior, leakage at seals, or noisy operation caused by misalignment or blockage.
- Service checks: inspect seals/gaskets, verify alignment ribs and tab engagement, and confirm unobstructed nozzle orifices.
| Item | Description |
|---|---|
| Part number | DG96-00424A – OEM nozzle assembly kit for NX58K9850SS slide‑in models |
Mechanically, technicians should verify that each nozzle seat is free from deformation, that sealing faces are flat and undamaged, and that mounting fasteners engage the designed threads without over‑torque; incorrect seating alters flow coefficients and can produce measurable performance deviations. For replacement,install the OEM assembly in the exact orientation shown in the service diagram and perform the manufacturer’s operational checks (flow/pressure verification and leak testing) to confirm restored performance rather than relying solely on visual fitment.
Common Failure Symptoms and Diagnostic Indicators for Nozzle Kit Malfunction
The DG96-00424A Samsung Assembly NOZZLE KIT;NX58K9850SS SLIDE IN FLE OEM is an OEM replacement nozzle assembly designed to control and direct the metered flow of gas or liquid within the appliance’s internal delivery system. As a precision orifice and mounting interface, the nozzle kit establishes spray pattern, flow rate and seal integrity; correct fitment depends on thread type, orifice diameter and the retaining/gasket hardware specified for the NX58K9850SS variants. Technicians should confirm the part number against the service manual and inspect mating surfaces and seals during installation to ensure the nozzle’s geometry and elastomer materials are compatible with the system pressures and media used in that model.
Common failure modes include partial or complete blockage, erosion of the orifice, seal deterioration and mechanical misalignment; these failures produce measurable symptoms such as reduced or uneven flow, sputtering output, seepage at the connection, or pressure instability. Diagnostic indicators to confirm nozzle-related faults include visual debris or corrosion at the orifice, measurable pressure drop across the component with a handheld gauge, a positive soapy-bubble leak test at joints, and reproducible performance changes when substituting a known-good nozzle. For practical troubleshooting, isolate the delivery line, document flow/pressure values before and after the nozzle, and inspect O-rings and retention clips for wear or incorrect assembly to distinguish nozzle faults from upstream regulator or pump issues.
- Reduced or irregular output – check for orifice blockage and measure inlet/outlet pressure differential.
- Continuous drip or seepage - perform soapy-bubble test and inspect sealing surfaces and gaskets.
- sputtering or intermittent flow – inspect for internal corrosion,foreign debris,or degraded elastomers.
- Fitment mismatch – verify thread, orientation and orifice size against the service parts list for NX58K9850SS.
| Item | Description |
|---|---|
| Orifice blockage | Debris or carbon buildup that narrows flow path; confirmed by flow test and visual inspection. |
| Seal/gasket failure | Elastomer compression set or abrasion causing leakage at the nozzle interface; confirmed by leak testing. |
| Incorrect part fit | wrong thread, orientation, or orifice size for the model; resolved by cross-referencing DG96-00424A against the NX58K9850SS service diagram. |
Replacement Considerations, Model Compatibility, and Stepwise Installation Procedure for the DG96-00424A Nozzle Kit
DG96-00424A Samsung Assembly NOZZLE KIT;NX58K9850SS SLIDE IN FLE OEM is an OEM replacement nozzle assembly that controls the directed flow and sealing interface for a slide-in cooking appliance. Technically, the nozzle kit locates and shapes a fluid or gas stream (air, steam, or fuel/air mixture depending on appliance configuration) and contains mating surfaces, seals, and fasteners that determine flow pattern, backpressure, and alignment with downstream components. In practice, failures manifest as flow irregularities (sputtering or reduced flow), uneven thermal distribution, intermittent sensor readings, or leaks at the mounting surface; replacing the DG96-00424A can restore designed flow geometry and correct those symptoms when the rest of the system (valves, lines, sensors) is verified functional.
Before installing,confirm model compatibility against the appliance service manual and visually compare mating features to avoid misalignment of ports or mismatched seal diameters. Isolate electrical and gas supplies, remove the appropriate access panels, and note the original orientation and any shims or O-rings so they are reinstalled in the same configuration. After fitting the new nozzle, tighten fasteners to the appliance manufacturer’s recommended torque or to a firm hand-tight plus a controlled fraction of a turn if torque specs are not available, then perform functional tests: leak or pressure testing for fluid/gas systems, electrical continuity and sensor verification for electrically sensed circuits, and an operational run to validate even heating or correct flow behavior. Replace any degraded gaskets or corroded fasteners rather than reusing them to maintain sealing integrity and long-term reliability.
- Verify part number and model fitment before disassembly.
- Isolate power and gas; allow components to cool if recently used.
- Document orientation,remove old nozzle,and inspect mating surfaces and seals.
- Install new nozzle with new seals; tighten to specified torque or controlled tightness.
- Perform leak/pressure checks and run a calibration or diagnostic cycle to confirm operation.
| Item | Description |
|---|---|
| Part number | DG96-00424A – OEM nozzle assembly for listed Samsung slide-in models |
| Compatible models | Confirm against service manual; commonly used in NX58-series slide-in units but verify serial/model tag |
| Common symptoms | Uneven heating, flow sputter, leak at mounting face, or diagnostic fault codes related to flow/sensor readings |
| Tools/consumables | Screwdrivers, torque driver (if spec available), new O-rings/gaskets, leak detection solution or pressure gauge |
Q&A
What is the DG96-00424A nozzle kit?
DG96-00424A is Samsung’s OEM nozzle/orifice assembly kit made for certain Samsung slide-in ranges (listed explicitly for models such as NX58K9850SS). It contains the burner orifices/nozzles (and sometimes small hardware) used at the burner ports to meter gas flow. The kit is used to replace damaged orifices or to perform a gas-type conversion when the appliance is prepared for that change.
Is this kit compatible with my NX58K9850SS range?
Yes – DG96-00424A is the OEM nozzle/orifice kit listed for the NX58K9850SS slide-in range. Always verify compatibility by matching the part number to your model and the model’s serial/product sticker, or consult Samsung parts diagrams for your exact serial/model variation before purchasing.
Does this kit convert the range between Natural gas and LP (propane)?
Yes, nozzle/orifice kits are typically used as part of a conversion between Natural Gas and LP because the orifice sizes differ. However, conversions often require more than just the orifices (for example regulator adjustment or replacement and possibly oven orifice changes). Always follow the range’s conversion instructions in the user/service manual and local codes – if the kit you buy does not include regulator parts, you may need additional components.
What comes in the kit – which orifices are included?
Contents vary by kit revision, but DG96-00424A normally includes the set of burner nozzles/orifices for the cooktop (surface burners).It may not include oven orifice parts or regulator inserts unless the product description specifically lists them. Check the seller’s parts list or Samsung’s parts diagram to confirm which pieces are included.
Can I install the nozzle kit myself or should I hire a technician?
Installing burner orifices is a mechanical task that can be done by a competent DIYer, but gas work can be hazardous. You must shut off the gas,follow the manufacturer’s instructions,test for leaks,and ensure proper flame characteristics after installation. Many manufacturers and local codes recommend using a qualified gas appliance technician, and some warranties require professional installation. If you’re not experienced with gas appliances, hire a licensed technician.
How do I tell if the nozzles/orifices are installed and adjusted correctly?
after installation,check each burner for proper ignition and flame. A correct flame is primarily blue with a small lighter-blue/transparent cone; a large yellow, sooty, or lifting flame indicates incorrect mixture/pressure or wrong orifice size.Perform a gas leak test (soap solution) at fittings and the manifold with gas on but burners off. also verify correct manifold/regulator setting per the service manual. If in doubt, have a technician complete the final checks and gas pressure measurement.
What symptoms indicate the nozzles are clogged,damaged,or wrong size?
Symptoms include weak or uneven flames,burners failing to light or staying lit,yellow or sooty flames,loud or irregular burner noises,and poor cooking performance. If the wrong-size orifice is installed (e.g., LP orifice used for natural gas), flames can be too large or too small and unsafe. Clogged orifices may be cleaned carefully, but if damaged or corroded, replacement is necessary.
Where should I buy an authentic DG96-00424A and how do I verify it’s OEM?
Buy from Samsung-authorized parts dealers, reputable appliance parts retailers, or directly from Samsung parts. Verify authenticity by matching the Samsung part number (DG96-00424A), checking seller reviews, and confirming return policies. OEM parts typically include Samsung branding/part number on packaging and will match diagrams in your model’s service manual. If you have any doubt, contact Samsung Parts customer support with your appliance’s model and serial numbers.
in Retrospect
The DG96-00424A Samsung Assembly NOZZLE KIT for the NX58K9850SS slide‑in OEM series is a purpose-built replacement component intended to restore and maintain the appliance’s original performance. As an OEM-specified part, it plays a role in the precise operation of the affected subsystem and helps ensure fit, compatibility, and reliable function consistent with manufacturer standards.
proper diagnosis and timely replacement of the DG96-00424A nozzle kit are vital to prevent cascading issues, preserve efficiency, and extend the service life of the appliance.When symptoms indicate wear or failure, a systematic assessment and the use of the correct OEM part – installed following manufacturer guidelines or by a qualified technician – provide the best chance of restoring safe, dependable operation.
Professional Appliance Service
If your appliance requires professional diagnosis or repair, visit
Revolff Home Services
for expert appliance repair services.
For local appliance service information see
Dryer repair Henderson
.
Replacement parts for many appliance models can also be found at
Reliable-Parts-Hub
.
Recommended Products
Search by part number or model number
Use product pages, category pages, and support pages to keep the path to the correct part clear.