Step 1: Unplug the refrigerator

Before starting any work on your refrigerator, unplug it from the power source to ensure your safety.

Step 2: Locate‍ the start device

The start device is usually located at the back of⁣ the refrigerator near the‍ compressor. it is a small,⁤ box-shaped component⁣ that helps start the compressor.Step 3: Test‍ the​ start device

Use ⁢a⁤ multimeter to test the start device for continuity. If the ⁢multimeter ⁢does not show any continuity,the⁢ start device is faulty and needs to ‌be replaced.

Step 4: Remove the faulty start⁣ device

Carefully disconnect the wiring attached to the⁤ start device and remove ⁣it from the refrigerator.

Step 5: Install​ the ⁤new start device

Connect the wiring to the ⁢new start device and place it in the same location as the old one.

Step 6: Plug in⁤ the refrigerator

Once the new start device ‌is installed,plug in the refrigerator and test ⁣to ensure‌ that it is indeed running⁣ smoothly.

By following these steps, you can diagnose and replace a faulty start device in your Frigidaire refrigerator ⁤with ease. If ‌you have ‍any doubts or concerns, it’s​ always best to ‍consult a professional technician for assistance.